-
Key Processing Techniques and Detailed Production Methods for Dried Ginger Slices
Fresh tender ginger can be processed into a dried product - dried ginger. Since ginger can be further processed into other products, its processing techniques are as follows: 1. Raw material: Select tender ginger, remove rotten ginger, and wash clean. 2. Peeling: Use a mechanical abrasion peeling method to remove the relatively thin skin layer. Several rubber heads can be installed inside a grinding wheel with a diameter of 1 m. Pour the clean ginger pieces into the grinding wheel. When the grinding wheel rotates, the skin of the ginger pieces will be abraded off. Then rinse off the ginger skin with clean water. 3. Slicing: Use manual labor or a slicing machine to cut the ginger pieces to a certain thick
-
Detailed Explanation of the Processing Technology and Production Method of Honey Garlic Milk
Garlic can reduce inflammation, kill bacteria, and prevent and treat high blood pressure and coronary heart disease, and it has a certain therapeutic effect especially in the prevention and treatment of cancer. Honey has the functions of nourishing and strengthening the body, promoting growth and development, and improving immunity. When honey is used together with garlic, it can eliminate the odor produced by garlic, improve the palatability of garlic, and at the same time give full play to the functions of both. 1. Raw material ratio: honey:garlic:egg yolk:sesame:oil=15:20:5:5:8 2. Initial processing of honey: add an appropriate amount of purified water to pure honey
-
Detailed Explanation of the Processing Technology and Production Method of Preserved Plum Ginger
Fresh ginger generally only has a spicy ginger taste and ginger flavor. This product, preserved plum ginger, adds preserved plum flavor to the ginger raw material and belongs to the category of preserved fruit foods. The processing technology is as follows: 1. Raw material: The raw material used for this type of preserved fruit product is semi-finished salted ginger base. 2. Desalting: Soak the salted base in a large amount of clean water and change the water as needed. If flowing water is used, the desalting effect is faster, and it can be used where there is an adequate water source. The degree of desalting depends on the need; generally, leaving about 2% salt in the raw material is sufficient. 3
-
How to Make Suan Gan Tea? A Step-by-Step Guide to the Production Method
Many people know that Dahu Township in Miaoli County is famous for its strawberries, but not everyone knows that Dahu also has another specialty, "Suan Gan tea" (sour citrus tea), which has a distinctive flavor and embodies the deep ancestral nostalgia of the Hakka people. In the mountainous areas of Taoyuan, Hsinchu, Miaoli and Pingtung in Taiwan, China, wherever there are Hakka communities, Suan Gan tea is produced. Suan Gan is a plant of the Rutaceae family, also known as "fan gan" (foreign citrus). It originated in southern Asia, and the Suan Gan abundantly grown in the Meixian area of Guangdong Province in China is larger in appearance than ordinary citrus, with a diameter of about 100-150 mm and a thick peel of about 10
-
Detailed Introduction to the Production Method of Crispy Garlic Slices
Garlic is delicious, nutritious, and of high medicinal value. However, garlic has a short storage period, sprouts easily, molds easily, and also has a distinctive pungent odor, which directly affects its dietary therapeutic value. Crispy garlic slices, on the other hand, are white to cream-colored porous flakes, with a high retention rate of allicin and amino acids, possessing a garlic aroma and honey fragrance, with no pungent odor or off-flavors, and with good results. The key processing points are: 1) Material selection: garlic bulbs mature and intact, with no insect damage or moldy, rotten, deteriorated conditions; 2) Clove separation: cut off the stem ends of the qualified garlic bulbs and separate into cloves; 3) Peeling: pour the garlic cloves into a peeling solution prepared from inorganic solvents and surface-active substances, etc.
-
Production Method and Food Processing Technology of Green Beans in Tomato Sauce
Production Method 1. Material selection: Grade the green beans into large and small sizes using a grader, and remove moldy, insect-damaged, dry-scarred, mottled, and off-colored beans. 2. Soaking: Soak in clean water for 16-24 hours (water-to-bean ratio of 2:1), changing the water to prevent sprouting and spoilage. The soaking time depends on air temperature, judged by thorough saturation. 3. Pre-cooking: Treat with 0.05% sodium hydroxide solution (solution-to-bean ratio of 1.5-2:1) at 99-100°C for 20-30 minutes (judged by
-
A Detailed Explanation of the Processing Technology and Production Method of Dried Eggplant
I. Process Flow Material Selection → Cleaning → Pre-boiling → Slicing → First Sun-drying → Salting → Second Sun-drying → Soaking and Sun-drying → Blending → Packaging II. Key Operating Points 1. Material Selection Choose fresh eggplants that are large, plump and tender, with fine texture, free of pests and diseases, and free of rot as the raw material. 2. Cleaning Use a knife to cut off the fruit stalk and calyx from the selected eggplants, put them in clean water, wash them clean and set aside. 3. Pre-boiling Add clean water to the pot and bring it to a boil, pour in the washed eggplant
-
Production Method and Technical Key Points for Canned Herbal Tea
Herbal tea production operation steps: 1. Medicinal material pretreatment: Remove impurities (small stones, grass, clumps of mud, etc.) and deteriorated, substandard materials (insect-damaged, moldy, rotten, etc.) from each Chinese medicinal material. Mesona chinensis (Hsian-tsao) needs to be cut into small sections, and monk fruit (Siraitia grosvenorii) needs to be crushed for later use. 2. Weighing: Accurately weigh each raw material (when weighing, select different measuring instruments according to the different amounts of each raw material, and they should be consistent with the measuring instruments used for re-weighing), and store them separately in different containers for later use. Carefully keep weighing and re-check records.
-
Detailed Guide to Dried Goji Berry Production: Processing Methods from Fresh Fruit to Dried Fruit
I. Sun-Drying Method 1. Mix freshly picked goji berries evenly with alkaline water, then spread them evenly in goji trays ("goji tray": a specialized tool for sun-drying or oven-drying goji berries. Generally, it is a wooden frame nailed together from wooden strips, 90 cm long and 60 cm wide, with window screen nailed to the bottom of the wooden frame, and a crossbar nailed below the window screen. The goji berries are spread on top of the window screen. Note: some use cardboard or bamboo mats, but none have better breathability and ventilation than window screen). Dry in a shaded, well-ventilated place (one day is preferable). Wait
-
Detailed Explanation of the Processing Technology and Production Methods of Crude Tea
The crude tea processing procedure is a process of repeated operations of sifting, cutting, selecting, picking, and pan-firing. The ordering of each process, the number of repetitions, and so on must all follow certain principles. 1. Sift first, then winnow. Winnowing mainly separates the light and heavy tea leaves and distinguishes superior from inferior quality. Only when the tea material is the same in length, size, and thickness can the light and heavy be separated most effectively and superior from inferior quality be distinguished clearly. Therefore, before winnowing, sifting must be carried out first. 2. Re-fire first, then cut. Generally, the head tea on the sieve surface
条件筛选