-
Breeding and Management Experience for Rearing Juvenile Stone Frogs
Stone frog farming is still quite common in our country. Anyone who has eaten stone frog knows that its meat is extremely delicious, so wild stone frogs fall far short of meeting people's demand. Moreover, everyone had best not hunt wild animals at will, as this would disrupt the entire ecological balance of the environment.
-
Shrimp Farming Experience in High-Temperature Season: Feeding and Management
In the high-temperature season, the weather is hot, sunlight is intense, air temperatures are high, and water quality is poor, which affects the shrimp's foraging and molting growth, and can also easily cause disease and death. Based on the practical experience of 21 large shrimp farming households including Liang Chunlin and Mu Youbin in Pulandian City, Dalian, located at the junction of the Yellow Sea and the Bohai Sea,
-
Sharing Experience on Four-Season Management of Snake Farms
Snakes are cold-blooded animals, and their body temperature changes with the rise and fall of the environmental temperature. Good management of a snake farm can ensure the normal growth and reproduction of snakes and improve the yield and quality of the snakes. Spring management. For breeding purposes, snakes are generally best introduced in spring, as there is no need to worry about the weather being too cold or too hot during transport, and the egg-laying period also falls at this time. Before introducing snakes into the snake farm, the site should be cleaned in advance, and cleaning and disinfection work should be done well. Snakes that have just emerged from hibernation basically do not eat for the first 2 to 3 weeks. They begin to eat a small amount of food in April, and their food intake increases greatly in May. Sufficient and hygienic feed should be provided regularly, and the snake farm should have clean drinking water. At the same time, snake farmers should frequently observe the snakes' activities and promptly record the snakes' predation, drinking, shedding, mate seeking, mating, reproduction, pests and diseases, and death. Summer management. Summer is the main mating and breeding season for snakes, and also the peak season for predation, activity, and growth. Female snakes should be well cared for, snake eggs should be collected in time, and preparations for reproduction and incubation should be made well. Female snakes and male snakes should be separated and kept individually, and the food supply should be sufficient and diverse. Female snakes that lay eggs should be carefully observed, snake eggs should be collected attentively, and the work of artificially incubating young snakes should be done well. During the intense heat of midsummer, cooling work for the snake nests should be done well. The snake farm should have clean drinking water, and feces should be cleaned up in time. Autumn management. Autumn is the peak predation season for snakes, so the feed supplied to snakes in autumn should be of high quality and large quantity, so that the snakes can store a large amount of fat in their bodies for overwintering and for the physical consumption during the emergence period the following year. At this time, individual snakes with small food intake should be manually force-fed so that they can safely pass the winter. Because wild snakes have a large predation volume in autumn and often come out of their holes to forage, this is also a good time to catch breeding snakes. Winter management. Winter is a key season for artificial breeding and is related to whether the snakes can safely overwinter. In particular, snakes from which venom is extracted before overwintering or snakes with weaker constitutions need even stronger management during the overwintering period. Before overwintering, the snakes should be allowed to eat their fill and drink enough, and the feed should be of high quality, large quantity, and diverse, so that they can accumulate enough fat to meet the needs of overwintering. During the overwintering period, snakes should be kept at an appropriate temperature (young snakes overwintering require an indoor temperature of 2°C to 6°C), and it is strictly necessary to prevent the indoor temperature from fluctuating between high and low, so as not to cause young snakes to wake up during hibernation, which is detrimental to overwintering. In winter, the temperature and humidity of the snake farm should be checked regularly. The snake overwintering pond should be covered with plastic film, and when the temperature rises, the plastic film should be opened so that the snakes can come out of their holes and move in the snake farm where there is sufficient sunlight. Sick snakes should be isolated or killed in time to prevent infection of the whole group. Because snakes are particularly concentrated during overwintering, infectious diseases are likely to spread and cause great harm.
-
Summer Beekeeping Management Experience and Precautions
In summer, the colony strength of bee colonies is easily reduced, and there are many reasons, mainly: first, the nights are short and the days are long, the temperature difference between day and night is relatively small, and the daytime temperature is relatively high; second, the lack of nectar sources lasts for 2 to 3 months, which easily causes the queen bee to stop laying eggs; third, attacks by hornets, toads, and other pests as well as pesticide
-
Experience Sharing on Raft-Style Abalone Farming in Shallow Seas
I. Selection of Sea Area Selection of sea area for abalone farming: clear and flowing water, fresh water quality, no pollution, no rivers nearby, abundant seaweed resources, relatively stable seawater salinity at medium salinity. Specific requirements are: 1. Water depth: for abalone farming sea areas, seawater should not be too shallow; ideally the water depth can reach between 15-20 m. ⟦4 <p>I. Selection of Sea Area</p><p>Selection of sea area for abalone farming: clear and flowing water, fresh water quality, no pollution, no rivers nearby, abundant seaweed resources, relatively stable seawater salinity at medium salinity. Specific requirements are:</p><p></p><p>1. Water depth: for abalone farming sea areas, seawater should not be too shallow; ideally the water depth can reach between 15—20 m.</p><p>2. Water temperature: the survival water temperature range for abalone is 1-28°C, and the optimum growth water temperature is 14-22°C. Therefore, in abalone farming sea areas, the winter water temperature should not be lower than 1°C, and in the high-temperature season the water temperature should not exceed 28°C.</p><p>3. Salinity: abalone is a marine organism of medium salinity, and the seawater salinity is required to be stable at 29‰-31‰ as suitable, with a minimum not lower than 27‰ and a maximum not exceeding 36‰.</p><p>4. Water flow: because abalone likes unobstructed water flow, sea areas with regular reciprocating currents should be selected, and the flow velocity should preferably be 50-60 m/min.</p><p>5. Physicochemical factors of water quality: in sea areas where abalone likes to inhabit, the pH value is 8.0-8.4, dissolved oxygen is not lower than 4 mg/L, ammoniacal nitrogen is not greater than 100 mg/L, and organic oxygen consumption is below 0.5—1 mg/L.</p><p>II. Material Preparation for Abalone Farming</p><p>1. Wooden stakes: the wind and wave resistance of raft-style farming depends on the wooden stakes, so the wooden stakes for abalone farming must be large and sturdy, with a required diameter of 20—25 cm and a length of not less than 80—100 cm.</p><p>2. Frame ropes and root ropes: both frame ropes and root ropes use 25—30 mm polyethylene rope; frame ropes are 60—70 m long, and root ropes are 30—40 m long, or can be determined according to water depth conditions.</p><p>3. Hanging ropes: use φ10—15 mm polyethylene rope, generally 8—10 m long, with 1 rope per hanging line.</p><p>4. Sinker stones: the sinker stones needed for abalone farming are either stone blocks or made of cement, each 2—2.5 kg.</p><p>5. Buoyancy: use φ30 cm plastic floats, 25 per rack, or increase buoyancy according to the growth condition of the abalone.</p><p>6. Rubber stick: made of rubber, φ8 cm, 40 cm long; during management the rubber stick is mainly used to remove miscellaneous algae and some small shellfish on the net cages.</p><p>7. Small iron shovel: make a small iron shovel 20 cm long and 5 cm wide. It is mainly used to remove oysters, barnacles and some other shellfish attached to abalone shells.</p><p>III. Selection of Abalone Farming Equipment:</p><p>Whether the equipment for growing abalone is reasonable directly affects the abalone grow-out results. Based on many years of production practice and screening, at present three kinds of abalone cages have the best results. The main grow-out forms are:</p><p>1. New-style abalone cage:</p><p>The plastic tray produced in Rongcheng has a specification of 52 cm×52 cm, a four-layer combined square tray cage with rounded corners, with a steel bolt fixed in the middle, 64.5 cm long and φ12 mm; the cage wall is sewn from 2—2.5 cm polyethylene mesh. This equipment has good water permeability, light regulation, sturdiness, economy and practicality, and is currently a relatively ideal abalone farming equipment.</p><p>2. Modified cage: modify the original scallop farming cage into 8 layers, with 40 cm plastic trays in the middle, the trays covered with 0.8—1 cm round holes, and the cage wall sewn from 1.5—2 cm polyethylene mesh. The disadvantage of this equipment is that feeding bait is inconvenient.</p><p>3. Introduced Japanese-style zipper multi-layer cage: φ60 cm, 5 layers in total, each layer 40 cm high, the cage wall sewn from 2—2.5 cm polyethylene mesh, and the feeding opening combined with a zipper. The disadvantages of this abalone cage are high cost and the zipper is easily damaged.</p><p>IV. Transportation of Seedlings</p><p>There are two transportation methods for abalone seedlings: dry transport and water transport. For short-distance transportation with a time not exceeding 15 hours, dry transport can be used. For long-distance transportation, water transport should be used. When transporting seedlings, the abalone should be transported together with the polyethylene corrugated boards to avoid the abalone seedlings squeezing each other, being injured and dying. The abalone seedlings can also be detached and transported together with kelp in polyethylene net bags.</p><p>1. Dry transport: the transport container can be a plastic foam box or wooden barrel, which must be fully soaked and washed with clean seawater before use. Place a layer of soaked large-leaf grass or fresh small kelp at the bottom of the container, then place the abalone seedlings, together with the attachment boards, or already detached and put into small net bags, on the large-leaf grass, one layer of abalone seedlings and one layer of large-leaf grass or fresh small kelp, not exceeding three layers. With this transportation method, the abalone seedlings are evenly distributed, not squeezed, not injured, and humidity can be maintained; the transportation survival rate reaches 98%, and it is currently the best transportation method.</p><p>2. Water transport: for long-distance transportation, first detach the abalone seedlings and put them into polyethylene net bags. A net bag with a specification of 40×30 cm can hold about 1000—1500 abalone seedlings. During transportation, put the net bags into canvas barrels on the ship; each cubic meter can hold 3000-5000 abalone seedlings. During the journey, use a water pump to draw water and replace fresh seawater once per hour. Under flowing water conditions, the survival rate of abalone seedlings in water transport for more than 100 hours can reach 96%. When transporting seedlings, be sure to choose clear fine weather, the air temperature should be above 5°C, and direct sunlight must be prevented. After the seedlings arrive at the destination, they must immediately be put into cages and released into the sea for rearing; never put them into cages overnight.</p><p>V. Management of Grow-out at Sea:</p><p>1. Grow-out density: the new-style abalone cage has a specification of φ52×52 cm, a four-layer combined square tray cage with rounded corners; each layer can hold about 150 abalone with shell length above 3 cm; one cage with four layers can hold 600. The φ40 cm 8-layer modified cage can hold 80 abalone seedlings with shell length above 3 cm per layer; one 8-layer modified cage can hold 640. The Japanese-style zipper multi-layer cage has a specification of φ60 cm and can hold 200 abalone seedlings with shell length above 3 cm per layer; one cage with five layers can hold 1000 abalone seedlings.</p><p>2. Bait feeding: the main bait varieties for abalone are kelp, wakame, and sea lettuce, followed by sargassum, Sargassum thunbergii, etc. The feeding amount is determined according to the feeding condition of the abalone, generally 15—20% of the abalone body weight. Feeding frequency: once every 8 days from March to April, once every 5 days from April to June, once every 7 days from June to July, once every 10 days from July to September, once every 7 days from September to December, and once every 15 days from December to March. When feeding, first remove residual bait and wash off floating mud and attachments inside the abalone cage, creating a good environment for abalone growth.</p><p>3. Timely thinning: by mid-April of the following year, when the abalone grows to 4.5—5 cm, promptly carry out cage separation, measurement and thinning. For the new-style abalone cage, 150 per layer is thinned to 80 per layer; for the modified cage, 80 per layer is thinned to 50 per layer; for the Japanese-style zipper multi-layer cage, 200 per layer is suitably thinned to 120 per layer.</p><p>4. Farming water layer: the abalone farming water layer is generally 4—5 m, which can avoid the attachment layer of oysters, mussels, etc. Entering winter, as the water temperature gradually decreases, adjust the water layer to 7—8 m, with a cage spacing of about 3 m.</p><p>5. Removal of predators and pests: in daily management, promptly remove shellfish, miscellaneous algae and floating mud on or inside the cage walls, especially oysters, mussels, barnacles, sea squirts, bryozoans, sea anemones, etc. attached to abalone shells. Most of these harmful organisms can attach to net cages and abalone shells, causing reduced water permeability of the abalone cage, affecting the movement and growth of the abalone, making it difficult for the abalone to feed, and causing it to become thin and weak and die. At present, for these harmful organisms, prevention and manual removal are mainly adopted. Prevention means avoiding their peak attachment period on the basis of understanding their reproduction patterns, and medicinal coatings can also be used for prevention and removal. Manual removal uses a rubber stick to lightly strike miscellaneous algae and shellfish on the abalone cage; the rubber stick does not damage the net cage. For what cannot be knocked off, shellfish attached to abalone shells are removed cleanly with a small iron shovel. In addition, after each big sea swell, promptly wash the floating mud inside the cage to prevent death caused by blockage from floating mud.</p><p>6. Safe production: frequently inspect the cage frames, wooden stakes, root ropes, hanging ropes, floats, and hanging sinker stones. If rope tangling is found, solve it promptly. Especially before typhoons arrive, carefully inspect whether various abalone farming facilities are firm. Entering winter, as the water temperature gradually decreases, try not to leave the water and expose them to the air; when the air temperature is below 5°C, do not expose them above the water surface.</p>
-
Sharing Experience on Artificial Propagation of Farmed Carp in Autumn
Carp can reproduce in both spring and autumn, but in conventional production, spring reproduction is the main approach. With the development of fishery production and changes in production models, reproducing fry only in spring is now far from meeting the needs of fishery production. Therefore, based on market demand, our farm has carried out carp fry propagation in both spring and autumn, and both have achieved good results. Below is an introduction to autumn carp fry propagation techniques for everyone's reference.
-
Experience and key technical points for mixed culture of scorpions and ground beetles
The ground beetle is a commonly used medicinal material, and raising it alone does not yield very high profits. By using a scorpion-rearing room to raise ground beetles and scorpions together, the profits produced by the ground beetles can cover the heating, feed and labor costs of scorpion rearing, while the scorpions provide pure additional profit. Under mixed culture conditions, the hatched
-
Experience Sharing on Large-Scale Sturgeon Farming in Ponds
In November 2000, the author used 80 mu of ponds in Meizhou, Guangdong, to farm hybrid sturgeon (Siberian sturgeon × Kaluga sturgeon) with stream water. After 180 days of rearing, the average yield reached 831.25 kg per mu, achieving relatively good economic returns. The key points of the farming process in Pond No. 1 are summarized as follows:
-
How to Farm Bighead Carp? A Few Farming Experience Tips to Share
Bighead carp is quite popular among consumers in the market, especially the fish head of bighead carp used for hot pot or stewed soup, which is a favorite of many people. Therefore, the market demand for bighead carp is beyond doubt, so if farmers want to achieve success in bighead carp farming,
-
Breeding pigeon management experience sharing, a must-read for pigeon keepers
Pigeons that have been transferred from growing pigeons to paired pigeons are called breeding pigeons; adult pigeons that have been paired and are preparing to lay eggs or are incubating and brooding are called laying pigeons; pigeons that are already raising squabs are called parent pigeons. Since breeding pigeons have different physiological characteristics and breeding purposes at different production stages,
条件筛选