-
Processing Method and Production Steps for Candied Ginger Plums
This product is a traditional sugar-preserved food, formerly marketed in Southeast Asia, with a sweet, sour, salty, spicy and distinctive flavor. The processing technology is as follows: 1. Raw material preparation: Prepare ginger powder: use fresh tender ginger and fresh old ginger at a ratio of 4:3, wash both types of ginger thoroughly, scrape off the ginger skin and floating skin, then chop and carry out color protection by soaking in a 0.1% sodium bisulfite solution for 8 hours, then rinse with clean water, put into a pulping machine to make a fine pulp, spread in a drying tray, and dry in a dryer at 65-70 degrees Celsius to obtain dried ginger powder. Add sugar and adjust the powder: use pure
-
Detailed Explanation of Disinfection Methods and Steps for Rabbit Hutch Environments
I. Disinfection of the Floor The floor of the rabbit hutch is an important part of the hutch's micro-environment and is also the place where rabbits excrete droppings, so floor disinfection is very important. Droppings should be cleaned up promptly every day, quicklime can be spread on the floor, and the rabbit hutch should always be kept ventilated, dry, clean and hygienic. Regularly spray disinfectant drugs such as Lysol solution or 20% caustic soda solution. II. Disinfection of the Rabbit Hutch 2 to 3 days before introducing breeding rabbits, the rabbit hutch should be thoroughly disinfected. Fumigation disinfection is generally used, that is, take 25 grams of potassium permanganate and 70 to 100 milliliters of formaldehyde solution; when the two are
-
Detailed Explanation of Apricot Jam Processing Methods and Production Steps
The process flow is as follows: raw material selection -> raw material washing -> cutting in half, pit removal, trimming -> softening, pulping -> heating and concentration -> canning, sealing -> sterilization, cooling -> inspection -> labeling -> finished product. . Operational key points: (1) Raw material selection: select fresh apricots that are free from pests and diseases, free from mold and deterioration, and at eight-to-nine-tenths ripeness. (2) Washing, cutting in half, pit removal, trimming: for peeling, the lye spraying peeling method can be used. Soak the fruit in a 10%-15% sodium hydroxide solution and boil for 5-10 minutes. After peeling, immediately rinse with a large amount of clean water.
-
How to Make Candied Lotus Root and Detailed Steps
1. Material selection. Choose fresh lotus root with a slightly yellow skin, pure white flesh, and a root diameter of 40-50 mm; and white sugar that is clean and white, with uniform granules, transparent, and meets hygiene standards. 2. Pre-processing. Wash the lotus root thoroughly in clean water, cut off the root ends, then rinse several times in clean water. Prepare a 2.5% sodium hydroxide solution and heat it to 90°C. Then put the washed lotus root into the sodium hydroxide solution and stir constantly. When the skin of the lotus root begins to peel off, remove it and rinse in clean water until
-
How to make sesame fried fish strips and detailed steps
30 grams of sesame seeds, 150 grams of grass carp meat (snakehead fish also works), 1 egg. 500 grams of peanut oil (50 grams actually consumed), 10 grams of salt, 8 grams of MSG, a little pepper, 30 grams of cornstarch. 1. Peel the grass carp meat and cut it into thick strips, add salt, MSG, pepper, and a little cornstarch, and marinate for 10 minutes. 2. Beat the egg, add the remaining cornstarch and mix into a batter, then coat the marinated fish meat with the batter, and roll it in sesame seeds. 3. Heat a wok and add oil; when the oil temperature reaches 150 degrees, add the ingredients
-
A detailed guide to kapok grafting propagation techniques, with a full breakdown of methods and steps
Kapok grafting propagation techniques
-
How are candied pear slices processed and made? Detailed method and steps
Candied pear slice production process 1. Process flow: raw material selection → peeling and slicing → salting → rinsing → blanching → sugar soaking → sugar boiling → sugar soaking → drying → finished product. 2. Raw material requirements: all pear varieties can be used. 3. Operation method: remove moldy and rotten fruit, peel, and cut into slices. Use salt at 15%-16% of the raw material weight, and pickle with one layer of fruit slices and one layer of salt. After pickling, because the salt solution has high osmotic pressure and has the effect of inhibiting the activity of microorganisms and enzymes, it can be preserved for a relatively long
-
Detailed making method and steps for peach cake
Peaches are crisp and refreshing, rich in nutrients. Using peaches as the basic raw material, with the addition of crabapple, carrot, gelatin, flavoring and other ingredients, the finely made peach cake has good toughness, is chew-resistant, has a unique flavor, and is rich in multiple vitamins. Its processing procedure is: 1. Formula: peach fruit 35%-37%, crabapple fruit 10%-12%, carrot 10%-12%, white granulated sugar 40%-42%, food-grade gelatin 1%-2%, edible flavoring and preservative sorbate in appropriate amounts. 2. Operations 1. Material selection: select fresh, non-rotting, non-
-
A Detailed Explanation of Black Tea Manufacturing: The Complete Process and Key Steps
Chinese black tea includes congou black tea, broken black tea and souchong black tea. Their manufacturing methods are largely similar, all involving the four processes of withering, rolling, fermentation and drying. The quality characteristics of all kinds of black tea are a red liquor and red leaves, and the formation of their colour, aroma and taste involves similar chemical change processes, differing only in the conditions and degree of the changes. The following uses congou black tea as an example to briefly introduce the manufacturing process of black tea. (1) Withering Withering refers to the process in which fresh leaves lose water over a period of time, causing the somewhat hard and brittle stems and leaves to become limp and wilted. It is the first step in the primary processing of black tea.
-
Detailed Explanation of the Correct Method and Operating Steps for Bagging Pears
1. Bagging time. Generally, bagging begins 25-30 days after petal fall. 2. Preparation before bagging. Bagging can be done after strict flower and fruit thinning and spraying. When bagging, further select the fruit, choosing drooping side fruit with a long fruit shape and tightly closed calyx end; such fruit tends to grow into large fruit, and because leaves block the sunlight, sunburn can be avoided. After selecting the fruit, carefully remove the petals, sepals and other attachments adhering to the stalk end, because long-term attachment of these substances will cause excessive humidity at the part where the fruit is attached and form water rust. 3-5 days before bagging
条件筛选