Bougainvillea cutting method illustrated guide, easy to follow with detailed steps

For bougainvillea cutting methods, many gardening enthusiasts prefer to look at illustrated bougainvillea cutting guides, as they are not only intuitive but also easy to imitate, making it simpler for enthusiasts to get started. Below, the wed114 editor brings you the detailed illustrated guide to bougainvillea cutting methods, compiled for gardening enthusiasts' reference. Let's take a look at the details.

1. Prepare the cutting medium. (Vermiculite, perlite, peat, 1:1:1. Sand, plain sandy loam, etc. can also be used.)

2. Spread a thin layer of elastic wadding at the bottom.

3. Fill with the medium and scald it with boiling water several times. Set aside to cool before use.

4. Cut a sun-facing branch as a cutting; new branches are best with a bit of old wood. After June, semi-lignified new branches do not need to include old wood. #p#Subtitle#e#

5. Cut the cutting. Old branches should be thick; new branches with leaves are fine.

6. Use a sharp knife to cut off the cutting. For large leaves, keep two half-leaves; for small leaves, keep two leaves and one bud. Length about 7-10cm. When cutting the base of the branch, the cut is uneven and the tissue is damaged. Use a sharp knife to trim away the damaged tissue and cut the base into a slanted surface in one stroke. The picture below shows the prepared branches.

7. Prepare rooting powder according to the instructions and soak the base of the cutting.

8. Use a clean (sterilized) wooden stick to poke a slanted hole, 7-8cm deep, then insert the cutting, leaving the leaf node exposed. #p#Subtitle#e#

9. After planting a pot, pour a little cold boiled water or bottled water to make the medium closely contact the base of the cutting. If conditions allow, place it in an outer pot for easier management.

10. Cover with plastic wrap to retain moisture. Open ventilation holes on top and place it in a spot with sparse sunlight for care.

11. By mid-June the seedlings have survived; divide and pot them up.

Bougainvillea cutting propagation method, bougainvillea pruning method illustrated guide

Bougainvillea has a long flowering period and can bloom all year round with proper cultivation, so many friends like to use bougainvillea bonsai to decorate their homes. So how do you propagate bougainvillea? And how do you prune it? Next, Xiao Qi shares the bougainvillea cutting method and bougainvillea pruning method.

I. Bougainvillea cutting method

One-step cutting method: Insert the cutting directly into the pot and let it root and grow branches in the pot, taking shape as quickly as possible, achieving the effect of cutting in the same year and initially taking shape for viewing in the same year.

1. Branches: In March-April, select branches that are perennial and more than 1-1.5cm in diameter, and cut them off at 20-30 cm above the ground. The thicker the selected branch diameter, the better. Varieties such as single-petal Dahong Baojin, single-petal Shuihong Baojin, and single-petal Zihua Baojin are better.

2. Branch treatment: Use a saw to cut the branches into sections 18-22 cm long (each section with at least 3 buds), place them in a box, and set them in a cool place where rain cannot reach. After about 10 days, when the bark of the cutting branches is slightly wrinkled, begin cutting.

3. Potting and planting: The planting medium can be pond mud mixed with sawdust, garbage fertilizer, or decomposed bagasse, at a ratio of 6:4. Plant 1-3 branches per pot, place them in a shade shed, and water thoroughly. After 1 month, they can sprout and grow roots, becoming new plants.

4. Management and care measures: Promptly do a good job of weeding, loosening the soil, and draining accumulated water to improve the survival rate. When the newly sprouted branches of the cuttings become lignified, prune them promptly to promote more new shoots, which helps form a good crown as early as possible.

II. Bougainvillea pruning method

Heavy pruning: From the name you can tell this pruning must be very heavy. The branches basically all need to be cut off, leaving only the stump and a few main branches. The few main branches left also need to be cut very short, very short. In particular, unwanted branches must be completely removed.

Moderate pruning: Naturally it is lighter than heavy pruning. It only cuts off some dead branches and unwanted branches. Parts that are growing well are only shortened. The overall tree shape does not change much.

Light pruning: Slightly shorten some weak branches, cut off diseased and dead branches, and slightly shorten healthy branches. Generally used on seedlings, small seedlings, and small trees. The purpose is to make good use of photosynthesis and let the small seedlings grow quickly.

Rejuvenation pruning: Cut all branches short so that the tree shape after pruning this year is not much different from the tree shape just after pruning last spring. The purpose of rejuvenation pruning is actually to free up enough space and room for the plant to grow.

The above isbougainvillea cuttingmethod andbougainvillea pruningmethod sharing. We hope it is helpful for everyone in cultivating bougainvillea and pruning bougainvillea to look even better.

Bougainvillea cutting method (illustrated)

Bougainvillea cutting: soil treatment

First prepare the cutting medium. (Vermiculite, perlite, peat, 1:1:1. Sand, plain sandy loam, etc. can also be used.)

Add a small amount of furnace slag to the culture soil. Before cutting, the slag should be sieved, selecting particles about 2 to 5 mm, soaked in boiling water, and sterilized. Drain until no water drips, then stir and mix thoroughly for later use.

Bougainvillea cutting: prepare flower pots

If many pots need to be cut, simple plastic pots can be used, and then pot them up after successful cutting. After choosing the flower pots, fill them with soil, and spread a thin layer of elastic wadding at the bottom of the pot.

After the soil is filled, water thoroughly, place in the sun, and air-dry for later use.

Bougainvillea cutting: prune branches

Cut a sun-facing branch as a cutting; new branches are best with a bit of old wood. After June, semi-lignified new branches do not need to include old wood.

Cut the cutting. Old branches should be thick; new branches with leaves are fine.

Use a sharp knife to cut off the cutting. For large leaves, keep two half-leaves; for small leaves, keep two leaves and one bud. Length about 7-10cm. When cutting the base of the branch, the cut is uneven and the tissue is damaged. Use a sharp knife to trim away the damaged tissue and cut the base into a slanted surface in one stroke. The picture below shows the prepared branches.

Bougainvillea cutting: soak branches

Prepare rooting powder according to the instructions and soak the base of the cutting.

Bougainvillea cutting: cutting

Use a clean (sterilized) wooden stick to poke a slanted hole, 7-8cm deep, then insert the cutting, leaving the leaf node exposed.

After planting a pot, pour a little cold boiled water or bottled water to make the medium closely contact the base of the cutting. If conditions allow, place it in an outer pot for easier management.

Cover with plastic wrap to retain moisture. Open ventilation holes on top and place it in a spot with sparse sunlight for care.

By mid-June the seedlings have survived; divide and pot them up.