A Detailed Guide to Propagating Roses by Cuttings

Roses are mostly propagated by cuttings. Cutting propagation is simple to perform, roots very easily, and the plants can bloom in the same year after rooting, so it is extremely widely used. Below, the editor introduces the rose cutting method!

Rose cutting method:

1. Soil

For rose cuttings, it is best to choose a new shallow clay pot with a 20 cm diameter, because it has good air permeability and makes rooting easy. Or, to make it even simpler, you can choose a transparent plastic box and pot them up after the cuttings have succeeded.

For the soil, a growing medium made by mixing 20% humus garden soil, 40% horse manure crumbs, and 40% river sand can be used as the substrate.

2. Time

Spring (May) and autumn (October) are best. At this time the temperature is between 20-25°C, which is most suitable for cuttings.

3. Preparation before cutting

Before cutting, the growing soil in the pot should be sprayed damp with a watering can the day before, but it must not be sprayed too much; by the next day it will be just slightly moist, which is most suitable for cuttings.

The cutting depth is 3-4 cm. When inserting, first use a chopstick to poke a hole in the soil, then insert the cutting, press the soil firm with your hand so that the potting soil and the cutting are in full contact, and then water thoroughly once.

4. Cutting method

When taking cuttings, choose vigorous shoots of the current year that are semi-lignified as cuttings, and use extremely sharp scissors;

Cut 6-10 cm with a node, the cut should be smooth and neat, remove the lower leaves, and keep only 3-4 small leaves at the top.

Buy 1 ampoule of vitamin B12 injection; after opening it, dip the cutting in the liquid medicine, take it out and let it dry for a while, then it can be inserted.

Care of roses after cutting:

After inserting, it is best to cover the flower pot with a plastic bag, tie the bag opening firmly with a string, open it again when watering is needed, and tie it firmly again after watering thoroughly.

Pots that have been used for cuttings should be placed in a spot without direct sunlight. The potting soil of the cuttings should be sprayed with water every day for 10 days. Except on rainy days, it can be sprayed once on cloudy days, and twice when the climate is dry, but the amount of water sprayed each day should not be too much.

After 10 days, still pay frequent attention to keeping the soil moist. Shade should be provided within 4-5 weeks, and only after sprouting can they gradually be allowed to receive some sunlight. Generally it takes about 2 months to root. After that, only normal care is needed.

[How to take rose cuttings] Rose cutting propagation method

Roses are mostly small climbing flowers that clamber over fences, and they have strong variability. Rose flower colors include white, red, and many other colors, and many flower lovers are especially fond of them. Roses are mostly propagated by cuttings. Cutting propagation is simple to perform, roots very easily, and the plants can bloom in the same year after rooting, so it is extremely widely used.

For rose cuttings, it is best to choose a new shallow clay pot with a 20 cm diameter, because it has good air permeability and makes rooting easy. Or, to make it even simpler, you can choose a transparent plastic box and pot them up after the cuttings have succeeded. For the soil, a growing medium made by mixing 20% humus garden soil, 40% horse manure crumbs, and 40% river sand can be used as the substrate.

Spring (May) and autumn (October) are best. At this time the temperature is between 20-25°C, which is most suitable for cuttings.

Before cutting, the growing soil in the pot should be sprayed damp with a watering can the day before, but it must not be sprayed too much; by the next day it will be just slightly moist, which is most suitable for cuttings.

When taking rose cuttings, choose vigorous shoots of the current year that are semi-lignified as cuttings, use an extremely sharp small knife to cut 6-10 cm with a node, the cut should be smooth and neat, remove the lower leaves, and keep only 3-4 small leaves at the top. Buy 1 ampoule of vitamin B12 injection; after opening it, dip the cutting in the liquid medicine, take it out and let it dry for a while, then it can be inserted. The cutting depth is 3-4 cm. When inserting, first use a chopstick to poke a hole in the soil, then insert the cutting, press the soil firm with your hand so that the potting soil and the cutting are in full contact, and then water thoroughly once.

After inserting, it is best to cover the flower pot with a plastic bag, tie the bag opening firmly with a string, open it again when watering is needed, and tie it firmly again after watering thoroughly. Pots that have been used for cuttings should be placed in a spot without direct sunlight. The potting soil of the cuttings should be sprayed with water every day for 10 days. Except on rainy days, it can be sprayed once on cloudy days, and twice when the climate is dry, but the amount of water sprayed each day should not be too much. After 10 days, still pay frequent attention to keeping the soil moist. Shade should be provided within 4-5 weeks, and only after sprouting can they gradually be allowed to receive some sunlight. Generally it takes about 2 months to root. After that, only normal care is needed.

How roses reproduce: cutting and seed propagation methods

How roses reproduce. Generally, roses can be propagated by sowing and cuttings, and the commonly used method is cuttings. Below are the steps and points for rose cutting and seed propagation respectively.

The cutting time for roses is generally any season except summer. First prepare the cutting soil. For the cutting soil, pure vermiculite or perlite can be used for cuttings; of course, ordinary garden soil also works.

Then prepare the cuttings. For the branches, you can choose disease-free branches from the current year or the previous year. Then cut the branches off. The thickness of the branches (0.2 cm-0.08 cm diameter is fine) and the length (8 cm-15 cm long is fine), keep 3-4 nodes, and bury 1-2 nodes in the soil.

After rose cuttings are taken, they need shade, and the environment should be kept ventilated. After that, patiently wait for the branches to root. Generally it takes about 2 months or so for them to root.

Rose seeds can be sown in spring and winter. First prepare the rose seeds, then soak the rose seeds in water for 1-2 days, take them out and mix in 3 times their volume of wet sand. The appropriate moisture level is when the sand can be held in a clump with no water seeping out between the fingers. After that, put the sand-mixed seeds into a container, remember to keep them moist, and then place them in a ventilated spot for care.