How to Grow Anthurium in Water: 3 Steps, Plus Care Tips
When we grow plants indoors, we often grow some of them in water, which makes the plants more attractive and tidy. So can the much-loved Anthurium be grown in water? The answer is yes. How do you grow Anthurium in water? How do you care for Anthurium grown in water? Below, the editor will tell you the method for growing Anthurium in water.
How to Grow Anthurium in Water
Growing Anthurium in water takes only three steps: choosing a pot, removing the plant from its pot, and potting it up. Below we focus on these three steps. After reading this, even gardeners with no experience can easily grow Anthurium in water. Of course, after growing it in water, you also need to master the care methods for Anthurium grown in water.
1. Choosing a pot
The container used for growing Anthurium in water is best semi-transparent or transparent. Unlike soil culture, you can choose a somewhat larger container, so that while growing the Anthurium you can also keep a few small fish in it. An opaque container obviously cannot achieve this effect.
2. Removing the plant from its pot
Take the Anthurium out of the soil, remembering not to damage the roots, then wash off the soil, cut off all the rotten roots, fine hair roots at the base of the Anthurium and the old yellow leaves on the plant, then soak the roots in a carbendazim or potassium permanganate solution. The purpose of this is disinfection, so that the Anthurium is less likely to be infected by disease after being grown in water.
3. Potting up
Once the container and the plant are ready, how do you grow Anthurium in water? At this point, carefully place the Anthurium into the hydroponic basket. It is best to put some substrate inside, which can hold the roots in place and prevent it from leaning during growth. Then add half or one third of water to the container, just enough to keep the lower part of the roots submerged in water.
How to Care for Anthurium Grown in Water
1. Changing the water
For a newly water-grown Anthurium, the water needs to be changed carefully and reasonably, generally once every 3 days. Each time you change the water, you need to add some nutrient solution to promote rapid rooting of the Anthurium. Once it grows new roots and new shoots, it means the Anthurium has basically adapted to the water-grown environment, and after that you can change the water once every 1-2 weeks.
2. Light
Anthurium grown in water likewise cannot be placed directly in the sun for care; instead, it should be placed in a semi-shaded environment. If the container is fully transparent, it is best to wrap a plastic bag around the outside to avoid the roots being fully exposed to strong light, which would affect development, because plant roots grow best in darkness.
3. Nutrients
Since the nutrients an Anthurium grown in water needs mainly come from the nutrient solution, at the very beginning, before it has rooted, there is no need to add nutrient solution; you can appropriately add rooting powder. Wait until it is growing normally, then start adding the nutrient solution bought from the flower market. Do not let the nutrients in the water become excessive.
How to Grow Anthurium in Water Key Care Points for Anthurium Grown in Water
Anthurium is a beautiful plant. Many people are not familiar with it, but everyone who has seen it wants to grow it. Below we take a detailed look at how to grow Anthurium in water and the key care points for Anthurium grown in water.
How to Grow Anthurium in Water
Living habits: It likes environments with high air humidity and muggy warmth, and likes shade and warmth. In an environment where the daytime temperature is no higher than 28°C and the nighttime temperature is no lower than 20°C, it can bloom well all year round. Above 35°C it will suffer sunscald, and below 14°C its growth is affected. It can overwinter safely at no lower than 5°C, and a sustained low temperature below 0°C will freeze the plant to death. It requires air humidity of 80%. Soilless culture is most suitable for its good growth.
Information:
Anthurium likes a warm, humid and well-ventilated environment. Its flowers and leaves are waxy, it has strong aerial roots, and its roots are semi-succulent.
Growing substrate:
Temperature: The optimum growth temperature is 20-28°C. The maximum temperature should not exceed 35°C, and the minimum temperature is 14°C. Below 10°C, there is always the possibility of cold damage.
Humidity: The optimum relative air humidity is 70-80%, and it should not be lower than 50%.
Light: The optimum light intensity is 10000-20000 Lux.
Placement: Indoor potted plants should be placed in a bright spot with some scattered light. Be very careful not to place the Anthurium in an environment with strong direct sunlight.
Key care points:
1. Control the room temperature well. In summer, measures should be taken to bring the room temperature down to within 35°C. In winter, if the indoor temperature is below 12°C, methods such as wrapping with plastic bags or making an insulated box can be used to raise the room temperature.
2. Maintain relatively high air humidity. This is the key to indoor care. Be sure to take measures to increase the air humidity of the environment where the Anthurium is placed. Methods such as misting the leaves can be used (be sure the leaves have no water on them at night).
3. Keep the leaf surface clean at all times.
4. Provide sufficient fertilizer and water. In spring and autumn, generally apply fertilizer water once every 3 days. If the temperature is high, depending on how dry or moist the substrate in the pot is, apply fertilizer water once every 2-3 days. In summer, apply fertilizer water once every 2 days; when the temperature is high, you can add one extra watering. In winter, generally apply fertilizer water once every 5-7 days. For fertilizer, liquid fertilizer is recommended; you can choose a complete fertilizer with an NPK ratio of 1:1:1. The N concentration applied should not exceed 0.2%. In the fertilizer, also pay attention to supplying elements such as Mg, S, Ca and B, Mo, Cu, Zn, or directly use a special fertilizer for Anthurium.
The above is the relevant introduction in this article. I believe that after reading it you will have a basic understanding of this. If you need more, you can continue to follow No.1 Home Network to learn more information.
How to Grow Anthurium in Water
Choosing a pot for growing Anthurium in water
Choose the pot according to the size of the Anthurium, but using a somewhat larger pot for growing it in water has many benefits. While growing the Anthurium, you can also keep a few small fish, which is both attractive and symbiotic. Pretty good, right? In addition, it is best to use a semi-transparent pot.
Potting up Anthurium for water culture
After digging the Anthurium out of the potted soil, remember to remove the rotten roots, fine hair roots and so on, then wash it completely clean with clear water. It can be placed in a potassium permanganate solution to disinfect it, and then rinsed with clear water.
Carefully place the Anthurium into the pot. You can put some clay pebbles inside as a substrate, which can both hold the plant in place and keep it breathing normally. Then add water, just half or 2/3 is enough, to ensure normal breathing.
If you choose a transparent glass container as the pot, it is best to cover the outside with a black plastic bag to prevent strong light exposure. Covering it on top with a transparent bag also helps keep it warm and moist. Then place it in a spot with scattered light, and it is best to keep the temperature above 10°C.
Changing the water for Anthurium grown in water
During the acclimation period, be sure to change the water frequently. In the first half month, you can change it once every three days, and in the following half month, change it once a week. Each time you change the water, add a nutrient solution specially for hydroponic flowers once. At the very beginning, do not add nutrient solution; adding rooting powder is fine. In this way, after a month new roots will grow out, and it will gradually adapt to the water environment.
After acclimation, there is no need to change the water so frequently. Generally, when you see that there are relatively many impurities in the water, it needs to be changed. Remember to clean the pot at intervals too. At this time, do not keep adding nutrient solution all the time, otherwise the water's nutrients will be too rich, microorganisms will multiply faster, and this is not good for the plant's growth.
Growing Anthurium in water is actually quite simple, and it is very clean and looks very pleasing to the eye. I hope the above methods can help everyone grow a perfect Anthurium.