What are the propagation methods for white orchid (Michelia alba)? Layering and grafting are more commonly used

White orchid (Michelia alba) is a highly ornamental flowering plant, and it can be seen in many gardens in our country. As more people grow it, questions about its propagation have also drawn interest. So how do you propagate white orchid? What propagation methods does white orchid have? Below, the editor takes everyone through a look.

I. How to propagate white orchid

II. Propagation methods of white orchid

Layering propagation

1. Simple layering

Among the propagation methods of white orchid, layering is one of the more commonly used. This propagation method is generally best carried out in February to March. We need to cut half the depth into the base of the selected branch, then cut a section upward. We insert a tile in the middle, then press it into the soil. After pressing it in, fix it with wire, then simply wait for it to take root before separating the branch.

2. Air layering

Generally, we should best choose vigorously growing branches. Cut a slit in the lower part of the white orchid, then wrap it with a bamboo tube, fill it with growing medium, then tie it tightly with string. During this period, it needs frequent misting, but the amount of water must not be too much; keeping a certain humidity is enough. In this way, by May of the following year, new roots will have grown, and at that time we just remove it and plant it in place.

Grafting propagation

1. Approach grafting

For the approach grafting method of white orchid propagation, it is generally best carried out from April to July. The specific approach graft is best at 70 cm above ground. After tying it, we should wrap it with mud, then wrap leaves on the outside, which can prevent rain from washing it away. After about 60 days, we can cut it off and grow it separately.

2. Cut grafting

When carrying out cut grafting, it is best to choose around September. We need to select a relatively vigorous white orchid scion, then combine the cut surfaces of the rootstock and scion, tie them with plastic film strips, bury them with soil after tying, then water regularly. Wait until the following spring to remove the covering, and after sprouting, keep only 4-5 buds and prune off all the rest.

Seed propagation

When carrying out seed propagation, it is best to choose the period from September to October. This propagation method of white orchid is also relatively simple. When sowing, we need to mix the seeds with fine sand and scatter them, then cover with 1-2 cm of soil and water. When watering, be careful to water thoroughly at one time, and after about 20 days, seedlings will emerge.

Cutting propagation

Before carrying out cutting propagation, we must first choose cuttings. Generally, it is best to choose relatively vigorous cuttings, as this gives a higher survival rate. When cutting, we can use chopsticks to poke a hole in the soil, then insert the cutting and water. After watering, the cutting can take root in about 30 days.

Summary: After reading the above content, I believe everyone has gained some understanding of how to propagate white orchid. After successful propagation, we can carry out subsequent care for it. If you do not know how to grow it, you can refer to the article on white orchid cultivation methods, which contains detailed introductions. That is all the editor has to introduce about white orchid propagation methods, and I hope it can be of some help to everyone.

How to propagate white orchid? Introduction to white orchid propagation methods

White orchid (Michelia alba) is a famous ornamental flowering tree. Its flowers are white and elegant, with a charming delicate fragrance, a long flowering period, and dense green branches and leaves. It has very high ornamental and landscaping value, is relatively simple to care for, and has many propagation methods. The more commonly used ones are grafting and layering, while seed sowing and cutting are used less. However, for home cultivation, grafting and layering are enough.

White magnolia (Magnolia denudata) seed propagation

Sowing and raising seedlings is done at the end of September or the beginning of October. Collect the mature fruit, take out the seeds, soak them in plant ash water for 1—2 days, then rub off the waxy aril, and wash them clean with water before sowing. Alternatively, after washing the seeds, stratify them with moist sand for cold storage; otherwise they easily lose their germination ability. Sow indoors in pots in March of the following year, and seedlings will emerge in about 20 days.

White orchid cutting propagation

White orchid can be propagated by cutting, but white orchid has poor regenerative ability for propagation, and cuttings do not easily take root and survive, so it is mostly not adopted.

White orchid grafting propagation

White orchid is propagated relatively often by grafting. Generally, 2-3-year-old vigorous plants of Magnolia biondii or Michelia champaca are mostly used as rootstock. Among grafting methods, there are two types: one is approach grafting, and the other is cut grafting.

1. Approach grafting: The time for approach grafting can be from spring to autumn, throughout the entire growing season. It is mostly carried out from April to July. The best position for approach grafting is 70 cm above the ground. After binding, wrap it with a mud ball, and wrap leaves on the outside to prevent rain from washing it away. After about 60 days, it can be cut off. Approach grafting is a relatively easy method to survive, but its growth is not as vigorous as cut grafting.

2. Cut grafting: In mid-to-late September, select well-developed magnolia branches as scions. The cut surfaces of the rootstock and scion should be tightly joined, tied with plastic film strips, smeared with mud, and the scion buried with soil to keep the soil moist. In northern China, in winter the scion needs to be covered with straw and the like. Remove the covering in the following spring. After sprouting, keep 4-5 buds on the upper part of the branch, and all the remaining buds should be removed. After 2-3 years of routine care, it can bloom.

White orchid layering propagation

White orchid layering propagation is also a relatively commonly used propagation method, mainly divided into simple layering and air layering.

1. Simple layering: Simple layering is best carried out in February to March. Cut half the depth into the base of the branch to be layered, then cut a section upward, insert a tile in the middle, then gently press it into the soil without breaking it, insert a thick “U”-shaped wire into the soil to fix it and prevent it from lifting, then pile soil on top. For spring layering, once root buds emerge, it can be cut off and planted separately.

2. Air layering: Before the dog days begin, select vigorous and disease-free young branches from the mother plant (1.5-2 cm in diameter), cut a slit in the lower part at the fork, then wrap it with a bamboo tube or bottomless clay pot, fill it with growing medium, tie it tightly on the outside with fine string, being careful not to disturb it, mist frequently with a small amount of water to keep it moist. New roots can grow around May of the following year, and it can then be removed and planted in place.

How to propagate white orchid and the feng shui role of white orchid

Many people choose to plant white orchid in home courtyards. How do you propagate white orchid? Below, let us talk about the feng shui role of white orchid.

Propagation methods of white orchid:

I. White orchid grafting propagation

White orchid is propagated relatively often by grafting. Generally, 2-3-year-old vigorous plants of Magnolia biondii or Michelia champaca are mostly used as rootstock. In June, approach grafting can be carried out on the branches of the white orchid plant. The cut on each is 3-5 cm long. After joining, tie tightly with plastic strips so that the cambium layers of the two are closely combined. After about 3 months, the rootstock and scion have basically grown together, and it can be cut away from the mother plant, and the upper part of the rootstock removed, becoming a new plant.

II. White orchid layering propagation

White orchid layering propagation is also a relatively commonly used propagation method, mainly divided into simple layering and air layering.

1. Simple layering: Simple layering is best carried out in February to March. Cut half the depth into the base of the branch to be layered, then cut a section upward, insert a tile in the middle, then gently press it into the soil without breaking it, insert a "U"-shaped thick wire into the soil to fix it and prevent it from lifting, then pile soil on top. For spring layering, once root buds emerge, it can be cut off and planted separately.

2. Air layering: Before the dog days begin, select vigorous and disease-free young branches from the mother plant (1.5-2 cm in diameter), cut a slit in the lower part at the fork, then wrap it with a bamboo tube or bottomless clay pot, fill it with growing medium, tie it tightly on the outside with fine string, being careful not to disturb it, mist frequently with a small amount of water to keep it moist. New roots can grow around May of the following year, and it can then be removed and planted in place.

III. White orchid seed propagation

Sowing and raising seedlings is done at the end of September or the beginning of October. Collect the mature fruit, take out the seeds, soak them in plant ash water for 1-2 days, then rub off the waxy aril, and wash them clean with water before sowing; alternatively, after washing the seeds, stratify them with moist sand for cold storage, otherwise they easily lose their germination ability. Sow indoors in pots in March of the following year, and seedlings will emerge in about 20 days.

IV. White orchid cutting propagation

White orchid can also be propagated by cutting, but white orchid has poor regenerative ability for propagation, and cuttings do not easily take root and survive, so it is mostly not adopted.

White orchid has many propagation methods. The more commonly used ones are grafting and layering, while seed sowing and cutting are used less. However, for home cultivation, grafting and layering are enough.

The feng shui role of white orchid:

1. Optimizing home feng shui

White orchid likes warmth and humidity, is suitable for good ventilation and sufficient sunlight, fears cold, avoids dampness, and neither likes shade nor tolerates sun scorch. Such living requirements give the owner a standard for judging whether the home environment is suitable for warmth, humidity and ventilation. If a home's white orchid grows well, it proves that these conditions have all been met. These conditions are precisely the standards for judging whether a house has good or bad feng shui. If you do not know whether your home's feng shui is good, plant a white orchid to judge it.

2. Enhancing marital affection

The flower language of white orchid is pure love and sincerity, and it is a white-series flower, relatively suitable for planting in the bedroom. Planting white orchid in the bedroom is, from the perspective of feng shui, beneficial for enhancing marital affection.

3. Bringing good luck

People whose Chinese zodiac signs are Rat or Pig are most suited to planting flowers and plants belonging to metal and water. At the same time, in years of Yi and Geng, people whose five elements belong to metal, such as those born in 1955, 1960, 1965, 1970, 1980, 1985 and other years ending in 5 and 0, are best suited to planting white-series flowers in the bedroom, or plants that look relatively austere. For this type of friend, white orchid is a good choice, and to a certain extent can bring them good luck.