How to propagate Schefflera arboricola by cuttings? Detailed cutting method, making the cuttings is the key point

Schefflera arboricola is a plant that grows relatively fast. When growing it, besides understanding how to cultivate Schefflera arboricola, you should also master its propagation techniques, so that old and new plants can alternate. Among the propagation methods for Schefflera arboricola, the most common is cuttings, so how do you take cuttings of Schefflera arboricola? Today we will learn about the cutting method for Schefflera arboricola.

When to take cuttings of Schefflera arboricola

Usually, the time should be chosen in spring or autumn when the temperature is relatively moderate, because when the temperature is 15-25 degrees, it roots relatively easily, so summer and winter should be avoided. In addition, the plum rain season should also be avoided.

The cutting method for Schefflera arboricola

Cuttings can also be divided into several methods, such as soil culture, water culture, and full-light mist. Although the final operations differ slightly, the early preparation work and the making of the cuttings are relatively similar. Below we will introduce in detail from two aspects: making the cuttings and taking the cuttings.

1. Making the cuttings

1. Choosing branches

The branches used as cuttings should preferably be 2-3 year old branches, and do not choose new branches that have just sprouted in the current year. The branches should be relatively robust, with a length of 15-20 cm, and the leaves on the branches should be relatively dark green and glossy.

2. Treating the branches

Remove the leaves at the bottom of the selected branches, keeping only 3-5 leaves at the top. Then disinfect the cut of the branch. You can soak it in potassium permanganate solution for 30 minutes, then take it out and dry it in a cool place. At this point, the making of the cutting is basically complete.

2. Taking the cuttings

1. Water culture cuttings

(1) Use a beverage bottle or glass cup as the water culture container. Wash the container clean, then let it dry for later use.

(2) Fill the container with clean water, then insert the cutting into the container, letting the base soak in the water and the upper leaves remain exposed above, avoiding contact between the base and the bottom of the container.

(3) Place it in a position with scattered light for care, mainly keeping the temperature at 15-25°C, then wait quietly for it to root.

(4) When white roots of 1-2 cm grow from the bottom of the cutting, it means rooting has succeeded. At this point, it can be transplanted for soil culture or water culture.

2. Soil culture cuttings

(1) Soil culture is the most commonly used cutting method for Schefflera arboricola. The choice of substrate is very critical. Generally, perlite is the best, and river sand can also be used as the substrate.

(2) Use a wooden stick to make small holes in the substrate, then insert the lower two-thirds of the cutting into the substrate. Use 1-3 cuttings per pot.

(3) Water thoroughly, then keep the soil moist, and manage it in a semi-shaded environment. When the temperature is relatively high, spray water to keep the temperature at 15-25°C. Generally, it can root in 3-4 weeks.

(4) After rooting, it cannot be transplanted immediately. Instead, you need to wait 15-30 days until it grows 3-4 true leaves before transplanting. After that, it can be managed according to normal cultivation methods.

3. Full-light mist cuttings

(1) Lay bricks at the bottom of the cutting trough, then cover it with a layer of sandy soil 30 cm thick. The soil needs to be disinfected.

(2) Insert two-thirds of the cutting into the sandy soil, then spray with mist. After that, keep the temperature between 15-25 degrees, spray water on the leaf surface of the cutting every day, and once it has rooted, it can be transplanted.

Schefflera arboricola pictures, cutting methods for Schefflera arboricola

Schefflera arboricola is an evergreen foliage plant that stays green in all four seasons. It is suitable for making into potted plants for indoor cultivation. It can beautify the environment and also purify the air. Its reproductive capacity is especially strong. Usually, cuttings are the main method of propagation, but some people do not know much about its cutting method and always fail to do it well when taking cuttings. Today, the editor will specifically explain this knowledge to everyone.

Schefflera arboricola is an evergreen small tree, also called the auspicious tree. This plant has especially many branches, and the branches are dense. It has palmately compound leaves, and the leaf surface is glossy, mostly leathery. Previously, this plant only grew in the tropical regions of the Americas, and was later introduced to various parts of the world. Now it is widely cultivated in most areas domestically.

1. Cutting temperature and time

When propagating Schefflera arboricola by cuttings at ordinary times, you must choose the correct time and also control the temperature well. This plant is suitable for propagation by cuttings in late spring and early summer each year. At this time, it is best to keep the temperature at around 20 degrees, and the nighttime temperature cannot be lower than 15 degrees.

2. Selection of cutting branches

When taking cuttings of Schefflera arboricola, the selection of branches is also very important. It is best to cut healthy branches of about 15 cm from the Schefflera arboricola. After cutting them off, remove the leaves below the top, leaving only 3-4 leaves at the very top. In addition, the lower end of the branch should be cut into a slanted surface.

3. Selection of cutting soil

When taking cuttings of Schefflera arboricola, you should also choose suitable soil. It likes loose and fertile soil. When taking cuttings, you can choose perlite and clean river sand as the substrate. After putting them into a flowerpot, water thoroughly, then insert the Schefflera arboricola branches into the flowerpot. Each flowerpot can hold 1-3 branches.

4. Management after cutting

Management after cutting Schefflera arboricola is also very important. You must spray water in time and keep the soil warm and moist. At the same time, place it in a place indoors with weaker sunlight. The indoor temperature should be kept between 15 and 25 degrees. As long as these conditions are met, the cut Schefflera arboricola branches can root and grow new leaves after one month.

How does Schefflera arboricola propagate? Propagation methods for Schefflera arboricola / both sowing and cuttings are possible

Among evergreen shrubs, Schefflera arboricola is one of the very popular varieties. Besides being very easy to keep alive, Schefflera arboricola is also very easy to propagate. For example, sowing, cuttings, layering, and so on are all very practical. Although simple, they still need to be carried out according to the correct procedure, so how does Schefflera arboricola propagate? Let us look at the propagation methods for Schefflera arboricola.

How does Schefflera arboricola propagate

Commonly used methods include sowing, cuttings, and layering. Among them, cuttings are further divided into water cuttings, soil cuttings, and full-light mist, while layering mainly uses air layering. Whether to use sowing can be chosen according to your own needs, and it is generally used for large-scale propagation.

1. How to sow Schefflera arboricola

1. Collecting seeds

The fruiting period of Schefflera arboricola for soil cuttings is December, and the time for collecting seeds is generally in January. After collecting the fruit, mix it with fine sand and then remove the peel and pulp. Use clean water to wash away the empty and shriveled seeds inside. What remains are relatively clean and plump seeds. You can choose to sow immediately after collecting, or first store them in sand to promote germination and sow after the temperature rises.

2. Sowing method

After the seeds are selected, how do you sow Schefflera arboricola? Use leaf mold or sandy soil as the seedbed, scatter the seeds on the seedbed, then cover with soil. The depth is generally 1-2 times the diameter of the seed, then water appropriately to keep the seedbed moist.

Keep the temperature between 20-25 degrees, so the seeds will germinate and emerge after 2-3 weeks. After another week of management and care, they can emerge. After emergence, they cannot be placed in sunlight immediately, but need shade. In autumn, full light can be given, and in winter, warmth needs to be maintained. After cultivating for 1 year, they can be potted.

2. Air layering

1. Time. When using layering, how does Schefflera arboricola propagate? In terms of time, April to June is generally chosen.

2. Method. Select robust 2-year-old branches from the Schefflera arboricola plant, perform ring-barking on the branch, keeping the width at about 1 cm, then wrap the wound with a mixture of wet moss and garden soil, tie both ends tightly with plastic film, keep the substrate moist, and wait for it to root. Then cut it short from the connection with the mother plant, and it can be transplanted.

3. How to take cuttings of Schefflera arboricola

1. Time

Generally choose spring or autumn, and pay attention to keeping the temperature between 15-25 degrees. Apart from the rainy season, winter and summer should be avoided as much as possible, otherwise rooting will be relatively difficult.

2. Method

Select 2-3 year old branches from the plant, cut them off and keep the length at 15-20 cm, remove the lower leaves, keep 3 leaves at the top, and after disinfecting the cut, make them into cuttings.

a. Water culture cuttings. Pour water into the selected container, insert the cutting into the prepared container, place it in a cool place for care, and ensure the temperature is between 15-25 degrees. After the cutting grows white roots of 1-2 cm, it can be transplanted, and then managed normally according to the cultivation method for Schefflera arboricola.

b. Soil culture cuttings. How does Schefflera arboricola propagate when using soil culture? Use perlite or garden soil as the substrate, insert two-thirds of the cutting into the substrate, water thoroughly, then place it in semi-shade for care, and control the temperature at around 20 degrees. Generally, it can root in about 20 days, after which it can be transplanted elsewhere.