Detailed Guide to Making Red Maple Bonsai and Care Techniques
❤ ❤`•.¸¸.•´´¯`•Green plants. This article originates from [Decoration Information]
A red maple bonsai can be placed anywhere in the courtyard and is a very dazzling sight. It can also be planted alone or in groups among rocks and green cypresses. When a red maple bonsai is placed in the home, the whole home will feel full of energy and positive vibes. So what are the techniques for making red maple bonsai, and what are the methods for making and caring for red maple bonsai? Let's learn about it together with the editor.
[Complete Steps for Making Red Maple Bonsai] Step 1:Selection of saplings. When making red maple bonsai, what we most often make is the double-trunk style bonsai, but we must choose plants of different heights and sizes to plant as bonsai, so as to achieve the effect. It is best to choose those with a short plant shape and thin, drooping branches. When selecting saplings, it is best if they can come with a soil ball.
Step 2:Preparation of tools. Pot, soil, filter mesh, small stones, pruning shears, aluminum wire, small saw, wire pliers. The choice of pot is very important. It is best if the color is similar to the tree trunk, and it does not need to be too deep. The bottom of the pot must have holes to facilitate drainage. Only in this way is it beneficial to the growth of the red maple. For the soil, prepare mountain sand, burnt mud ash, and loess, mix them in a certain proportion, and then make them into nutrient soil.
Step 3:Potting. Before potting, it is best to remove excess soil from the roots to leave enough space. Then trim off some excess root hairs. Then bring the two trees close together. Lay filter mesh over the drainage holes at the bottom of the pot. Spread a layer of small stones on the filter mesh. Put the red maple tree into the pot, and at this time be sure to check the front side. Once placed, add soil to the pot, but do not fill it full, so that it is convenient for watering. While adding soil, press it firmly so that the tree does not move position.
Step 4:Pruning. Prune away overly tall trunk branches, dense branches inside the tree cavity, overly weak branches, and branches growing too low on the trunk. Wait until the shaping is complete before pruning.
Step 5:Shaping. When shaping, first wrap the small branches on the trunk with aluminum wire, then bend them in the desired direction. If you feel that the extension angle of the branches cannot achieve the ideal shaping effect, you can use aluminum wire to guide them appropriately. Note that each trunk branch must be guided to the correct position with aluminum wire and aluminum wire.
Step 6:Wiring and bending. This is the last step. Around the trunk and inside the tree cavity, as well as some weaker branches on the main branches, all need their directions determined, wrapped and guided with aluminum wire, so that they grow in the direction we want. Excess branches and leaves should be cut off with pruning shears.
[Care Methods for Red Maple Bonsai] First:Ordinary culture soil can be used for planting. After watering, place it in a semi-shaded place. Frequently spray water on the branches and trunk. When the leaves begin to unfold, light can be increased. After all the leaves have unfolded, apply a light (nitrogen) fertilizer solution once. Place it in a semi-shaded place with even sunlight for normal management.
Second:Artificial control of foliage viewing can be carried out once each during the two periods between spring and summer and between summer and autumn. Only in this way will its growth not be affected. For artificially controlling new leaves, fertilizer and water must be strengthened. This is the key to success.
Third:If the leaves scorch under strong sunlight, it should be placed in a cool, semi-shaded place, and a nitrogen-phosphorus-potassium compound solution should be applied lightly, about 2 times a week. In this way, by autumn, bright red new leaves can grow.
Conclusion:Plants also have life, so everyone needs the right methods to grow plants well. Red maple bonsai also requires everyone to cultivate and care for it attentively, and only then will it show its most beautiful side. The relevant content on red maple bonsai making techniques and care methods is shared with everyone here, and I hope it can help everyone.
Making and Caring for Red Maple Bonsai
Red maple, also known as purple-red Japanese maple and red duck-foot maple, is a deciduous shrub or tree of the genus Acer in the family Aceraceae. It is a variety of Japanese maple, with a plant height of about 10 m, an open or umbrella-shaped crown, cracked old bark, grayish brown, smooth and glossy young branch bark, opposite leaves, long petioles, palm-shaped leaves with 7 lobes, the lobes reaching deep to the middle of the leaf or more, and purple-red leaf color. Small purple-red flowers form corymbs clustered at the branch tips, with long peduncles, labiate flowers, a flowering period in May, and fruit ripening from September to October. There is also red feather maple, whose plant is short and weak, with drooping branches, purple-red leaves year-round, 7 to 11 deep lobes, and finely toothed leaf margins deeply lobed like feathers. It can also be used to make bonsai.For the propagation of red maple, green maple, Japanese maple, trident maple, etc. can be used as rootstock, and grafting can be carried out by bud grafting or approach grafting in summer when the plant grows vigorously. The rootstock can be either 2-to-4-year-old seedlings or 2-year-old branches sprouting from old stumps that have grown for many years and are quaint and plain. Grafted and surviving plants can be transplanted before sprouting in spring. After planting, water thoroughly, place them in a bright place for care, and frequently spray water to maintain relatively high air humidity. After the plant is established, apply a fully decomposed dilute liquid fertilizer once every 20 to 30 days to promote its growth.
Red maple can be made into different forms of bonsai according to the shape of the stump, such as straight-trunk style, slanting-trunk style, curved-trunk style, waterside style, and cliff style; several plants can also be planted together in one pot to make bonsai in forms such as double-trunk style, three-trunk style, and forest style. When making forest-style bonsai, choose plants of different heights and sizes and plant them in groups, and pair them with rocks, moss, and other accessories to express the artistic conception of "drunkenly dyed maple forest." Because its leaves are relatively large, the crown should not be made into cloud pads or cloud-like shapes. It can be pruned into a natural style that is coordinated in height and elegant and unrestrained. The shaping method is mainly pruning, supplemented by wiring. Some branches can be pulled to make the layout reasonable. Red maple bonsai is suitable for white stone pots, green glazed ceramic pots, and yellow purple clay pots, but it is not suitable to use red or purple pots that are similar to the leaf color.
Red maple likes a warm and humid environment and sufficient but soft sunlight. It fears scorching sun exposure and is not drought-tolerant. During the growing season, it can be kept in a place without direct sunlight, and especially avoid west-facing sunlight; during high summer temperatures, it is even more necessary to prevent scorching sun exposure. It can be placed under a shade shed or under the shade of other plants, otherwise the leaves will scorch and fall off. Water frequently to keep the pot soil moist, but there must be no water accumulation, so as to avoid root rot. When the air is dry, sprinkle water on the plant and the surrounding environment to increase air humidity and make the leaf color glossy. During the growing season, apply a fully decomposed dilute liquid fertilizer or compound fertilizer once every 15 days. Stop fertilizing during high summer temperatures or on rainy days. The fertilizer solution should be mainly phosphorus and potassium fertilizer, supplemented by nitrogen fertilizer. If phosphorus and potassium fertilizer are insufficient, the leaves will not turn red. In southern regions, the flower pot can be buried outdoors in a wind-sheltered, sunny place to overwinter. In northern regions, it is best to overwinter in a cold room not lower than 0°C, do not fertilize, and do not water too much. Keeping the soil from drying out is enough. The most beautiful time for red maple is when new leaves have just grown. To increase ornamental value, leaves can be removed once each in June and September every year. Apply fertilizer once one week before leaf removal. After leaf removal, prune the plant and strengthen water and fertilizer management. In about 15 days, fresh tender red leaves can grow. If the leaves are scorched by strong sunlight, the scorched leaves can be removed in August, and the plant can be placed in a ventilated, cool, semi-shaded place, with a light thin nitrogen-phosphorus-potassium compound fertilizer solution applied once a week. It will not be long before bright red new leaves grow. During the growing season, promptly remove leaves that affect the tree shape and ventilation and light transmission inside the tree cavity. After new leaves sprout, pay attention to pinching and removing the growing tips to promote the growth of fine dense young branches, making the leaves small and dense and giving them higher ornamental value. Repot once every 2 to 3 years before sprouting in spring. The pot soil should be fertile and loose and rich in humus. It can be used after mixing 2 parts humus soil and 1 part sandy soil evenly.
Red Maple Bonsai Making and Caring for Red Maple Bonsai
?`?.??.?′′ˉ`?Related recommendations:
?How to grow spider plant ?Succulent Sempervivum ?How to grow anthurium ?June snow pictures
?`?.??.?′′ˉ`?Green plants. This article originates from [Decoration Information]
A red maple bonsai can be placed anywhere in the courtyard and is a very dazzling sight. It can also be planted alone or in groups among rocks and green cypresses. When a red maple bonsai is placed in the home, the whole home will feel full of energy and positive vibes. So what are the techniques for making red maple bonsai, and what are the methods for making and caring for red maple bonsai? Let's learn about it together with the editor.
[Complete Steps for Making Red Maple Bonsai] Step 1:Selection of saplings. When making red maple bonsai, what we most often make is the double-trunk style bonsai, but we must choose plants of different heights and sizes to plant as bonsai, so as to achieve the effect. It is best to choose those with a short plant shape and thin, drooping branches. When selecting saplings, it is best if they can come with a soil ball.
Step 2:Preparation of tools. Pot, soil, filter mesh, small stones, pruning shears, aluminum wire, small saw, wire pliers. The choice of pot is very important. It is best if the color is similar to the tree trunk, and it does not need to be too deep. The bottom of the pot must have holes to facilitate drainage. Only in this way is it beneficial to the growth of the red maple. For the soil, prepare mountain sand, burnt mud ash, and loess, mix them in a certain proportion, and then make them into nutrient soil.
Step 3:Potting. Before potting, it is best to remove excess soil from the roots to leave enough space. Then trim off some excess root hairs. Then bring the two trees close together. Lay filter mesh over the drainage holes at the bottom of the pot. Spread a layer of small stones on the filter mesh. Put the red maple tree into the pot, and at this time be sure to check the front side. Once placed, add soil to the pot, but do not fill it full, so that it is convenient for watering. While adding soil, press it firmly so that the tree does not move position.
Step 4:Pruning. Prune away overly tall trunk branches, dense branches inside the tree cavity, overly weak branches, and branches growing too low on the trunk. Wait until the shaping is complete before pruning.
Step 5:Shaping. When shaping, first wrap the small branches on the trunk with aluminum wire, then bend them in the desired direction. If you feel that the extension angle of the branches cannot achieve the ideal shaping effect, you can use aluminum wire to guide them appropriately. Note that each trunk branch must be guided to the correct position with aluminum wire and aluminum wire.
Step 6:Wiring and bending. This is the last step. Around the trunk and inside the tree cavity, as well as some weaker branches on the main branches, all need their directions determined, wrapped and guided with aluminum wire, so that they grow in the direction we want. Excess branches and leaves should be cut off with pruning shears.
[Care Methods for Red Maple Bonsai] First:Ordinary culture soil can be used for planting. After watering, place it in a semi-shaded place. Frequently spray water on the branches and trunk. When the leaves begin to unfold, light can be increased. After all the leaves have unfolded, apply a light (nitrogen) fertilizer solution once. Place it in a semi-shaded place with even sunlight for normal management.
Second:Artificial control of foliage viewing can be carried out once each during the two periods between spring and summer and between summer and autumn. Only in this way will its growth not be affected. For artificially controlling new leaves, fertilizer and water must be strengthened. This is the key to success.
Third:If the leaves scorch under strong sunlight, it should be placed in a cool, semi-shaded place, and a nitrogen-phosphorus-potassium compound solution should be applied lightly, about 2 times a week. In this way, by autumn, bright red new leaves can grow.
Conclusion:Plants also have life, so everyone needs the right methods to grow plants well. Red maple bonsai also requires everyone to cultivate and care for it attentively, and only then will it show its most beautiful side. The relevant content on red maple bonsai making techniques and care methods is shared with everyone here, and I hope it can help everyone.
▓ Recommended Reading
?How to grow water lilies ?Poppy cultivation?Is calla lily poisonous?Can cactus prevent radiation?Office feng shui plants
?Hydroponic tulips ?Cactus blooming?Potted flower pictures?Uses of cactus?How to grow Peperomia