How to propagate Fragrant Wood? Introduction to Fragrant Wood propagation methods

Fragrant Wood is a sun-loving tree, but it also tolerates slight shade. It prefers warmth, requires deep soil, has strong sprouting ability, grows slowly, and has a long lifespan. However, seedlings are not very cold-resistant and need protection in North China. The plant can withstand low temperatures of -10°C and prefers soil with ample sunlight and good drainage. Fragrant Wood is usually propagated by seed sowing and cuttings. Let's take a look at the propagation methods of Fragrant Wood together!

Fragrant Wood Seed Propagation

The seed maturation period of Fragrant Wood is very close to its seed dispersal period. Once mature, the seeds fall off at the slightest wind or rain, making them difficult to collect, or they are eaten by birds and animals. When the seeds begin to show signs of maturity, collect them from the tree promptly. Fragrant Wood seeds are wrapped in juicy flesh and are prone to contamination and mold. The collected seeds must be processed immediately: pile the fruits to ferment, crush the fruit skins, wash them in water, remove the seeds and discard debris, then dry them in the shade and store them in a ventilated, dry place.

1. Sowing season: Both spring and autumn are suitable. Generally, the germination rate of autumn sowing is higher than that of spring sowing. Before sowing, soak the selected seeds in warm water at an initial temperature of about 20°C for 24 hours. After the seeds absorb water and swell, remove them and place them under warm and humid conditions to promote germination. Generally, the seed rate is 6 kg per mu.

2. Precautions

① Afraid of waterlogging: The soil should be kept as dry and loose as possible. Generally, do not water or water as little as possible.

② Afraid of shade: During the seedling stage, thin out seedlings in a timely manner to increase light penetration and ventilation.

③ Afraid of fertilizer damage: Fragrant Wood is relatively sensitive to fertilizer. Apply as little fertilizer as possible or even no fertilizer to seedlings to avoid fertilizer burn or excessive leggy growth caused by excessive fertility.

Fragrant Wood Cutting Propagation

Cuttings can be taken in both spring and autumn. During the tree's dormant period, select 1-year-old healthy branches from a mature mother tree, cut them into 10-15 cm long cuttings, with the upper cut about 1-1.5 cm from a bud and the lower cut about 0.3-0.5 cm from a bud. The cutting substrate should preferably be one with good permeability, medium water-holding capacity, and a neutral or slightly acidic pH.

Before cutting, the substrate must be sterilized. Dip the base of the cuttings in ABT rooting powder solution (use according to the instructions). The soaking time is 12-24 hours. Open a trench and bury the cuttings, inserting them about 2/3 into the soil. After cutting, cover with plastic film to increase air humidity. Careful management is required before rooting. Rooting begins in about 45 days.

How to propagate Fragrant Wood: Fragrant Wood propagation methods

Fragrant Wood is named for the faint fresh fragrance emitted by its leaves. So do you know how to propagate Fragrant Wood? Let's take a look at the propagation methods of Fragrant Wood together.

1. Seed propagation: The seed maturation period of Fragrant Wood is very close to its seed dispersal period. Once mature, the seeds fall off at the slightest wind or rain, making them difficult to collect, or they are eaten by birds and animals. When the seeds begin to show signs of maturity, collect them from the tree promptly. Fragrant Wood seeds are wrapped in juicy flesh and are prone to contamination and mold. The collected seeds must be processed immediately: pile the fruits to ferment, crush the fruit skins, wash them in water, remove the seeds and discard debris, then dry them in the shade and store them in a ventilated, dry place.

Sowing season: Both spring and autumn are suitable. Generally, the germination rate of autumn sowing is higher than that of spring sowing. Before sowing, soak the selected seeds in warm water at an initial temperature of about 20°C for 24 hours. After the seeds absorb water and swell, remove them and place them under warm and humid conditions to promote germination. Generally, the seed rate is 6 kg per mu.

Seedling management precautions: Fragrant Wood seedlings have three fears: First, they are afraid of waterlogging. The soil should be kept as dry and loose as possible. Generally, do not water or water as little as possible. Second, they are afraid of shade. During the seedling stage, thin out seedlings in a timely manner to increase light penetration and ventilation. Third, they are afraid of fertilizer damage. Fragrant Wood is relatively sensitive to fertilizer. Apply as little fertilizer as possible or even no fertilizer to seedlings to avoid fertilizer burn or excessive leggy growth caused by excessive fertility.

2. Cutting propagation: Cuttings can be taken in both spring and autumn. During the tree's dormant period, select 1-year-old healthy branches from a mature mother tree, cut them into 10-15 cm long cuttings, with the upper cut about 1-1.5 cm from a bud and the lower cut about 0.3-0.5 cm from a bud. The cutting substrate should preferably be one with good permeability, medium water-holding capacity, and a neutral or slightly acidic pH.

Before cutting, the substrate must be sterilized. Dip the base of the cuttings in ABT rooting powder solution (use according to the instructions). The soaking time is 12-24 hours. Open a trench and bury the cuttings, inserting them about 2/3 into the soil. After cutting, cover with plastic film to increase air humidity. Careful management is required before rooting. Rooting begins in about 45 days.

How to propagate Fragrant Wood? Fragrant Wood propagation methods

Fragrant Wood can purify the air and repel mosquitoes and flies. It is a plant very suitable for indoor potted cultivation. I believe many flower enthusiasts, watching their Fragrant Wood grow day by day, will have the idea: how can one plant become several? So, next let's introduce the propagation methods of Fragrant Wood.

Image: Fragrant Wood cutting propagation method

I. Fragrant Wood cutting propagation method

Fragrant Wood cutting propagation can be carried out in both spring and autumn, and the flowering period is in spring.

During the dormant period of Fragrant Wood, we can select 1-year-old healthy branches from a mature mother tree and cut them into 12-15 cm cuttings, with the upper and lower cuts kept at a certain distance from young buds (upper cut 1-1.5 cm from the young bud; lower cut 0.3-0.5 cm from the young bud).

For the cutting substrate, it is best to choose soil with good permeability, medium water-holding capacity, and a neutral or slightly acidic pH. Here, permeable river sand or perlite is recommended, with a very high success rate.

Image: Fragrant Wood seed propagation method

II. Fragrant Wood seed propagation method

Sowing Fragrant Wood seeds is best done in autumn, and spring is also acceptable. According to the editor's recommendation, the success rate of autumn sowing is even higher than that of spring.

First is obtaining and processing the seeds: The seed maturation period of Fragrant Wood is very close to its seed dispersal period. Once mature, the seeds fall off at the slightest disturbance, making them very difficult for us to collect, or they may be eaten by birds and animals. Therefore, when the seeds begin to show signs of maturity, immediately collect them from the tree and process them. Fragrant Wood seeds are wrapped in juicy flesh and are prone to mold contamination. The fruits need to be piled to ferment, and the fruit skins crushed and washed in water. After removing the seeds and discarding debris, dry them in the shade and store them in a ventilated, dry place.

The sowing process of Fragrant Wood is very simple. Before sowing, first soak the seeds in warm water at an initial temperature of 20°C for one day (24h). After the seeds absorb water and swell, remove them and promote germination under warm and humid conditions. After that, sow them!

That's all for the introduction to Fragrant Wood propagation methods. Cutting propagation and seed propagation are both Fragrant Wood propagation methods with relatively high success rates. Flower enthusiasts, hurry up and get started, and turn the idea of one plant becoming several into reality.