-
Processing Methods and Technical Key Points for Licorice Olive
The raw material used for licorice olive is also olive base, with the same processing technique as chili olive, only the formula is different, and of course the flavor is different too. The processing technique is as follows: 1. Raw material treatment: Desalt the olive base. Since the aim is to highlight the licorice flavor, too much salt should not be left during desalting; generally a slight saltiness is sufficient. After desalting, drain the water or bake until semi-dry for later use. 2. Licorice liquid preparation: Use 5% licorice liquid, that is, for 50 kg of olive base use 2.5 kg of licorice, add 50 kg of clean water, boil down into 20-25 kg of licorice liquid, filter and set aside.
-
Processing Methods and Technical Key Points for Licorice and Sour Plum Ginger
This product is made by candying young ginger with licorice and sour plum juice. It has a sweet-and-sour ginger spicy flavor, stimulates the appetite and promotes saliva secretion, and refreshes the mind. The processing technology is as follows: 1. Raw material proportions: fresh young ginger slices 25 kg, granulated sugar 5 kg, licorice powder 10 kg, clove powder 20 g, sour plum juice 2 kg (or citric acid 150 g plus water 3 kg), sodium cyclamate 200 g, potassium sorbate 15 g. 2. Raw material handling: Select young ginger with thick, tender flesh, wash it, and scrape off the skin. Cut diagonally according to the transverse diameter into 0.
-
A Detailed Guide to Processing and Making Licorice Watermelon Seeds
Ingredients: 500 g watermelon seeds, 10 g peanut oil, 25 g refined salt, 3 g licorice, 50 g quicklime. Method: 1. Pour the quicklime into a large bowl, add 500 ml of clean water, stir well to make lime water, then add the watermelon seeds and soak for 4-5 hours, then remove them, rinse thoroughly with clean water, and remove the mucous membrane on the shells. 2. Put the refined salt and licorice into a pot, pour in 150 ml of clean water, place over high heat and boil for 10-15 minutes, filter out the licorice to make licorice salt brine
-
Processing Methods and Technical Key Points for Licorice Waxberry
Licorice waxberry is a type of preserved fruit product, and the raw material waxberry is utilized in the form of its finished salted blank. Its processing technology is as follows: 1. Raw material handling: The process of turning fresh waxberry into a semi-finished product is as follows. Cure with 20% salt, one layer of fruit and one layer of salt. Add another layer of salt on top. After curing for more than ten days, scoop the raw material out of the brine and sun-dry it until salt frost appears, which is the semi-finished salted blank. Further process from the salted blank. First, desalt by soaking in water to remove the overly salty taste; the degree of desalting generally leaves about 2% salt, and there is no need to remove the salt completely.
-
Detailed Explanation of the Processing Technology and Preparation Method of Shiitake Roast Chicken
1. Processing the dressed chicken. Soak the dressed chicken in water for half an hour to remove the blood water leached out. After washing clean, use a knife to prick from the body cavity outward, being careful not to pierce the skin (the purpose is to make the chicken marinate evenly). 2. Making the brine. Star anise 50 g, cinnamon 50 g, kaempferia galanga 15 g, tsaoko 35 g, fennel 45 g, amomum villosum 20 g, Sichuan peppercorn 20 g, clove 5 g, bay leaf 3 g, angelica dahurica 25 g, dried tangerine peel 15 g, cassia bark 40 g, cardamom 30 g, zi kou 30 g, shiitake mushroom 15 g, ginger 15 g, galangal 30
-
What are the technical key points of scientific processing methods for shiitake mushrooms?
1. Sun-drying method: Sun-drying is the most convenient and easy method. The method is: spread the harvested shiitake mushrooms promptly on a sun-facing grain-drying yard or concrete ground. When drying, first place the caps upward and the stems downward, arranging them one by one. After drying until half-dry, turn the stems upward and the caps downward, until they are more than 90% dry. If rainy weather occurs, supplement with fire-powered drying. 2. Oven-drying method: After the shiitake mushrooms are harvested, they should be placed in small baskets, not packed too full to avoid crushing, and should be baked on the same day. The general method is: spread the harvested shiitake mushrooms on drying trays
-
A Detailed Guide to Harvesting and Processing Shiitake Mushrooms
Storage and processing content: Harvesting methods for shiitake mushrooms (1) Harvesting time. It is best to harvest mushrooms on a sunny day, because mushrooms harvested on a sunny day have less moisture and better color; mushrooms harvested on a rainy day have more moisture, are difficult to dry, and are prone to turning black during the baking process, making it difficult to guarantee processing quality. For shiitake mushrooms cultivated indoors with bagged substrate, it is best not to spray water directly on the mushroom logs (blocks) before harvesting. (2) Harvesting method. In winter, temperatures are low, shiitake mushrooms grow slowly, and the harvested mushrooms have thick flesh, a strong aroma, and good quality. In autumn and spring, because temperatures are higher,
-
Detailed Explanation of Key Points in Shiitake Mushroom Drying and Processing Technology
Shiitake mushroom is a world-renowned precious edible fungus and also a traditional export commodity of our country. Shiitake mushrooms contain a unique aroma, are rich in nutrients, and have tender and smooth flesh. They are one of the ingredients commonly used in famous Chinese and foreign dishes and are hailed as the king of vegetables. At the same time, shiitake mushroom is also a famous medicinal fungus, with extremely high medicinal value such as tonifying qi, preventing hunger, and activating wind and breaking blood. Modern medicine has proven that long-term consumption of shiitake mushrooms can strengthen the physique; soften blood vessels, lower cholesterol, and even have anti-cancer and cancer-preventing effects. Therefore, shiitake mushrooms are very
-
A Detailed Guide to the Processing Techniques and Uses of the Chinese Honey Locust
I. Harvesting and Processing: In autumn, cut off the thorns, slice and sun-dry them. For large Chinese honey locust pods, harvest the ripe fruit in autumn and sun-dry. II. Uses: Landscaping: The Chinese honey locust has a tall and unusual tree form, with a nearly round crown and dense branches and leaves. In May it blooms with pale greenish-white flowers; the fruit is colored in its early stage and ripens into black pods in autumn. As the autumn wind blows, the large black pods knock against each other, producing a cool and pleasant sensation. The wood of the Chinese honey locust is hard and can be used to make various kinds of furniture. The fruit can be used to wash clothing. Medical applications: The Chinese honey locust is pungent in taste and warm in nature; it invigorates the blood and reduces swelling, discharges pus and promotes lactation. Main
-
Detailed Explanation of the Key Technical Points for Processing and Utilizing Rhododendrons
I. Harvesting and Processing: Pick the flowers in late spring, the leaves in summer, and the roots in autumn and winter; use them fresh or dry them in the sun for later use. II. Utilization. Landscaping: Rhododendrons have extremely high ornamental value, displaying a beautiful, dignified, and poised tree form throughout the year; not only are the flowers beautiful, but the leaf color of the whole plant is displayed for a longer period, and the plant's form changes with the seasons. Rhododendron stenophyllum var. tungense from Tibet and Rhododendron neriiflorum from Yunnan have a layer of ice-blue bloom on their leaves, which is very spectacular. Rhododendron coriaceum from Yunnan produces yellow-brown new leaves or shiny
条件筛选