-
Detailed Introduction to Honeysuckle Processing Techniques
There are 2 processing methods: air-drying and oven-drying. (1) Sun-drying. Before 1970, producers in Shandong generally chose a wind-sheltered, sunny flat surface or stone slab with long sunlight exposure, spread a thin layer of flowers in the morning, and dried and collected them the same day. This method saves labor and time, but windy days and rainy or overcast weather affect quality. Since 1970, the basket-drying method has been used more often. A basket frame about 1.7 m long, about 0.7 m wide and 5-7 cm high is made from wooden rods, with a base of sorghum stalks or a mat (sorghum stalks are not peeled; the mat should be turned over to absorb water better). Each basket dries 2
-
Detailed Explanation of the Processing Technology for Puffed Shiitake Mushroom Snacks
Shiitake mushroom is a well-known health-promoting edible fungus. Puffed snacks made with shiitake mushroom powder as an additive are nutritious, crispy in texture, and convenient to eat, making them a nutritious health food suitable for all ages. 1. Ingredients and Formula: Shiitake mushroom powder 10%, refined wheat flour 50%, white granulated sugar 10%, high-quality purified water 30%, with appropriate amounts of vegetable oil, salt, monosodium glutamate (MSG), and flavoring. 2. Key Processing Points: 1. Raw Material Preparation: Remove the stems and impurities from the shiitake mushrooms, wash them clean, dry them in an oven or under the sun
-
Detailed Explanation of the Processing Technology for Canned Shiitake Mushroom and Meat Sauce
Canned shiitake mushroom and meat sauce is a new type of health food that is deeply welcomed by the market. It is rich in nutrients and has a unique flavor, making it an excellent product for the family dining table. Its processing technology is as follows: 1. Raw materials and auxiliary materials. Shiitake mushrooms: Choose dried shiitake mushrooms with a strong aroma and thick caps, or fresh shiitake mushrooms of good quality. Pork: Choose small-package cut meat with a certificate of conformity (it should undergo chilled acid removal). Doubanjiang: Choose sauce fermented and brewed from broad beans or soybeans, with normal color, moderate viscosity, no impurities, no off-odor, a salt content of 12%-15%, and a moisture content not exceeding 16%.
-
Shiitake Mushroom Deep Processing: Production Workflow and Key Technical Points
I. Shiitake Soy Sauce Production Process Generally, each kilogram of shiitake by-products (deformed mushrooms, substandard mushrooms, small mushroom pieces, mushroom stems, and the residue from shiitake submerged fermentation) can be made into 10 kg of premium soy sauce. The production steps are: 1. Raw material selection: 10 kg fresh mushrooms, 400 g dried ginger, 300 g fennel, 250 g Sichuan pepper, 200 g star anise, 200 g orange peel, 150 g cassia bark, 100 g food-grade preservative, 50 g lysine, 50 g monosodium glutamate (MSG), 6 kg roasted salt, 10 kg soybean water, 10 kg warm water
-
Detailed Explanation of New Processing Technology for Shiitake Mushroom Floss and Key Operating Points
1. Raw materials. 100 kg shiitake mushroom stems, 5 kg high-quality soy sauce, 4 kg white sugar, 3 kg peanut oil, 5 kg scallions, 0.2 kg monosodium glutamate (MSG), 4 kg yellow rice wine, 0.6 kg refined salt, appropriate amounts of ginger, fennel, food coloring, and five-spice powder. 2. Raw material processing. Select shiitake mushroom stems free of sawdust, insect damage, and mold. Cut them into pieces about 1 cm long with a chopping machine, wash them clean with water, and soak for 1-2 days to allow them to fully absorb water and soften. 3. Pre-boiling. Place the soaked mushroom stems in a pot, heat to boiling, then simmer over low heat for 3 hours. Then use a wooden
-
Detailed Guide to the Processing Methods and Techniques of Shiitake Mushroom Instant Tea
Instant tea is a solid beverage made by extracting and concentrating the effective soluble substances in tea leaves that determine the color, aroma and taste of the tea infusion, and it is a popular beverage on the international market. Shiitake mushroom instant tea is produced by adding shiitake mushrooms with their unique flavor during the production of instant tea, significantly enhancing the health benefits of the tea without losing the proper flavor of tea; it retains the characteristics of dissolving instantly when brewed, leaving no residue, and being easy to adjust in strength, and it can also be brewed on its own and mixed with milk, fruit juice, honey, sugar, etc., making it deeply loved by consumers. Its production method is introduced as follows:
-
Method for Processing Shiitake Mushroom Stems into Shiitake Floss
1. Raw material formula: 100 kg shiitake mushroom stems, 4-6 kg high-quality soy sauce, 3-4 kg white sugar, 2-3 kg peanut oil, 5 kg scallions, 0.2 kg monosodium glutamate, 4 kg yellow rice wine, 0.6 kg refined salt, appropriate amounts of ginger, fennel, food coloring, and five-spice powder. 2. Raw material preparation: Select shiitake mushroom stems free of sawdust, insect damage, and mold, cut into 1 cm pieces, wash clean with water, and soak for 1-2 days to allow full water absorption and softening. 3. Pre-boiling: Place the soaked mushroom stems into a pot and heat to a boil, then simmer over low heat
-
What should be paid attention to during the processing of shiitake mushrooms?
Shiitake mushrooms have long been known as a mountain delicacy, rich in nutrients and delicious in taste. Their dried products (commonly known as dried mushrooms) are classified into flower shiitake, winter shiitake, thick shiitake and thin shiitake. However, because current drying techniques and other methods lag behind, dried shiitake products suffer from problems such as poor color, weak aroma and unattractive mushroom shape, seriously affecting their commercial value. If shiitake mushrooms are processed well, their value can be increased by nearly 1 times. The following discusses the key techniques of processing methods for dried shiitake products: 1. Sun-drying method. Stop spraying water on the mushroom bodies 2 days before harvesting shiitake mushrooms, and choose clear weather
-
How to master the dehydration step in shiitake mushroom processing
Dehydrated shiitake mushrooms with good commercial value have bright yellow gills, a plump shape, uniform size and a rich aroma. To process good shiitake mushrooms, mastering the "dehydration step" is crucial. 1. Timely harvesting: this is the basis for ensuring the finished mushrooms have bright color. The main reason shiitake mushrooms become discolored during drying is that the mushroom bodies are injured before drying. To overcome this shortcoming and enhance the mushroom bodies' resistance to external pressure, timely harvesting is very important. They should be harvested when the partial veil has fully split and the cap has curled upward like a gong. Do not spray water in the 4 hours before harvest; harvest using the "twist-harvest method",
-
A Detailed Guide to Practical Techniques for Shiitake Mushroom Processing and Fresh-Keeping
When harvesting shiitake mushrooms, place them gently in plastic baskets without squeezing or deforming them, then remove impurities from the fruiting bodies, pick out damaged mushrooms, trim the base of the stems, and sort them according to cap size, thickness and moisture content, arranging them on bamboo blinds or reed mats in a ventilated place. They should be processed promptly; piling them together for a long time will reduce quality. 1. Drying shiitake mushrooms (1) Sun-drying: For mushrooms to be sun-dried, stop spraying water directly on the fruiting bodies 2-3 days before harvest to avoid excessive moisture content in the fresh mushrooms. Harvest promptly when the fruiting bodies are 70-80% mature, the partial veil has just broken, and the cap edges curl inward in the shape of a copper gong. It is best to harvest on a sunny day; after harvest, use stainless steel scissors to trim the stem base, sort according to cap size, thickness and moisture content, spread them gill-side up on reed mats or bamboo blinds, and place them in sunlight to dry. Generally, about 3 days of drying is needed to reach full dryness.
条件筛选