-
A Detailed Guide to the Processing and Making of Beijing Roast Duck
Beijing Roast Duck is a famous specialty of Beijing, made from Beijing force-fed duck. The product is characterized by golden, glossy skin, white, fine and tender meat, and crisp skin with fragrant meat. Its process flow is: raw material preparation -> scalding the skin and applying color -> air-drying the carcass -> roasting -> removing from the oven and brushing with oil. 1. Raw material preparation: select a healthy duck of 2.5-3 kg, slaughter it by the method of cutting the three tubes, then remove the feathers and internal organs, cut off the duck feet and wings, and wash clean with water. 2. Scalding the skin and hanging color: after pouring boiling water over the duck body 4 times, pour maltose water (maltose:water = 1:6) over it.
-
A Detailed Guide to the Processing Techniques and Methods for Making Dried Shrimp
Main raw materials: Acetes shrimp, salt, etc. Equipment and tools: iron wok, baskets, flow-through stove. Production method: Grade and sort the Acetes shrimp; if there is a lot of debris, use a sieve to screen it; if the raw materials are not clean, wash them, then place them in baskets to drain, with each basket holding about 6 kg of Acetes shrimp. The following methods can be used for cooking: ① Basket-rotating cooking method. Fill an iron wok with a diameter of 90 cm seven-tenths full of fresh water, add 2 kg of salt, and after bringing to a boil, sprinkle an appropriate amount of salt onto the basket of drained shrimp (at a ratio of 15 kg of salt per 50 kg of premium-grade Acetes shrimp, 2.5 kg of salt for grade-one shrimp, 3.5 kg of salt for grade-two shrimp, and 4.5 kg of salt for grade-three shrimp), then place it into the wok, cover with a lid, and after it comes to a boil, remove the lid and use a basket needle to prod the basket body so that it rotates, making the shrimp cook evenly; when the shrimp whiskers straighten out, take out the shrimp basket and place it in a ventilated place to cool. Generally, change the water in the wok once every 5-8 baskets cooked, to prevent the wok water from becoming too salty and affecting the quality of the finished product.
-
Introduction to the preparation method and detailed processing flow of dried snake
Dried snake for Chinese medicine is a dried body made by cutting open the abdomen of a medicinal snake, removing the intestines and other internal organs, and then drying it. The processing method for adult dried snake is as follows: after the medicinal snake is caught, kill it by hurling it to the ground or putting it into boiling water; then step on the snake's head and neck with a foot, hold the snake's tail with one hand, and with the other hand use small round-tipped scissors to cut open the abdomen from the cloacal opening forward to the head and neck, remove the internal organs, separate the snake skin from the snake meat at the neck, cut the snake skin, and pull the skin downward with force until the cloacal opening, then cut the snake skin off. With the head as the center, roll the snake meat into a disc shape, insert the tail into the last coil, and
-
Detailed Explanation of the Processing Techniques and Methods for Deer Sinew
(1) Removal of Deer Sinew Deer sinew refers to the muscle tendons of the deer's four limbs and back. The removal method is as follows: ① For the forelimbs, use a knife to slit open between the back of the metacarpal bone and the muscle tendon, cutting down to the hoof heel below the accessory hoof, leaving the accessory hoof and sesamoid bone on the sinew, then continue slitting upward along the sinew groove to the termination of the fascia at the upper end of the carpal bone and cut it off. The tendon on the front side is also slit open between the front of the metacarpal tendon and the bone, cutting downward to the coronary band with a piece of skin about 5 cm long, then cutting it off, and trimming upward to the upper end of the carpal bone, cutting at the termination of the fascia. ② For the hind limbs, slit open from between the tibia bone and the sinew cavity down to the accessory hoof, cut off at the hoof heel, leaving the accessory hoof and sesamoid bone on the sinew, then continue upward along the sinew groove through the calcaneus to the termination of the tibial muscle tendon and cut it off. The removal of the tendon on the front side of the hind limb is done by slitting open from between the front of the metatarsal bone and the tendon down to above the coronary band, leaving a piece of skin 5 cm long and cutting it off, then trimming upward to the upper end of the metatarsal bone to above the hock joint, cutting open the thick muscle group, and cutting at the termination of the fascia. ③ The muscle tendon of the back refers to the lateral fascia of the longissimus dorsi, which is used to wrap and attach the tendons. First remove the longissimus dorsi, lay it flat on a table with the inner side facing up, then use a knife to remove the intact fascia.
-
Medicinal Value and Processing Methods of Snake Penis
Snake penis is the reproductive organ of the male snake. A complete set of snake penis includes two gonadal testes and two hemipenes, and it contains components such as male hormones and proteins. In traditional Chinese medicine, there is the theory of "tonifying an organ with a corresponding organ, seeking the same qi." According to determinations by relevant scientific research departments, the kidney-tonifying substances contained in snake penis are 10% higher than those in deer penis, and more than about 30% higher than those in sea dog kidney and dog kidney. Snake penis has the functions of tonifying the kidney and strengthening yang, warming the middle and calming the organs, and can treat impotence, kidney deficiency, tinnitus, chronic orchitis, and cold womb infertility in women. Snake penis
-
Processing method and key technical points for stuffed roasted dates
Stuffed roasted dates are crisp and sweet, aromatic, and uniquely flavored. The production method is as follows: 1. Material selection: use sun-dried large and medium-sized high-quality red dates as raw material. 2. Pitting: use a pitting machine or pitting drill to remove the pit lengthwise along the date fruit. 3. Stuffing: according to the size of the date, select suitable five-spice peanut kernels and insert them into the pitted dates. 4. Baking: pour the stuffed dates into a specially made baking cage, filling about 70%-75% of the total volume; the cage
-
Processing and Production Method for Flavored Dried Potato Tidbits
Process flow: potatoes → washing → peeling → trimming → dicing or cutting into strips → precooking → cooling → disulfide solution treatment → drying → puffing → adding flavor enhancers → packaging → finished product. Key operating points: ① Peeling: using alkali peeling or infrared radiation peeling gives better results. ② Shaping: cut into dice, strips or other shapes according to product requirements. ③ Drying: the moisture content of the raw material should be strictly controlled; when the moisture of the raw material drops to 2.8-3.5%, drying can be stopped. ④ Puffing: use air
-
Introduction to the Processing Methods and Detailed Steps of Dried Shrimp
Dried shrimp is a famous seafood product, made from cooked and dried shrimp such as the spear shrimp, wool shrimp, ridgetail white prawn, and prawns. There are mainly two processing methods for dried shrimp, namely the boiling method and the steam method. The boiling method is the traditional processing method and is currently widely used. Its processing method is as follows. 1. Raw material handling: Before boiling, the raw shrimp must first be sorted by quality and size. Shrimp mixed with sand and dirt must be thoroughly washed clean in clear water, and small shrimp, small fish, and debris must be removed. To avoid the shrimp developing a stuck-skin appearance
-
How is swordfish processed? A detailed explanation of swordfish processing techniques
Swordfish (xiphias gladius linnaeus, Common swordfish) is a large deep-sea fish, named for the shape of its upper jaw, which is flat on top and bottom and thick in the middle with thin edges, like a sharp treasured sword. But because of its speed, like an arrow released from the bowstring, it is also called the swordfish. It is distributed in the Indian Ocean, the Atlantic Ocean and the Pacific Ocean. The coast of the Americas in the western Atlantic is the main producing area of swordfish, and it is mainly caught by longline fishing. Most of the individuals caught are about 10-100 kg, and those above 100 kg
-
Detailed Explanation of the Processing Technology for Canned Silver Carp in Tomato Sauce
I. Process Flow: Raw Material Inspection --- Raw Material Processing --- Salting --- Flour Mixing --- Frying --- Adding Tomato Sauce --- Filling Cans --- Sealing Cans --- Sterilization --- Incubation Test --- Packaging --- Finished Product. II. Key Operating Points. 1. Raw Material Inspection. (1) Use fresh (iced) or well-frozen silver carp (Hypophthalmichthys molitrix), with the fish body intact, normal odor, clean eyeballs, bright cornea, bright red gills, firm and elastic muscle, and tight connection between bone and flesh. (2) Raw fish weighing over 1000 g per fish.
条件筛选