-
What are the technical key points of scientific processing methods for shiitake mushrooms?
1. Sun-drying method: Sun-drying is the most convenient and easy method. The method is: spread the harvested shiitake mushrooms promptly on a sun-facing grain-drying yard or concrete ground. When drying, first place the caps upward and the stems downward, arranging them one by one. After drying until half-dry, turn the stems upward and the caps downward, until they are more than 90% dry. If rainy weather occurs, supplement with fire-powered drying. 2. Oven-drying method: After the shiitake mushrooms are harvested, they should be placed in small baskets, not packed too full to avoid crushing, and should be baked on the same day. The general method is: spread the harvested shiitake mushrooms on drying trays
-
Detailed Explanation of the Processing Technology and Preparation Method of Shiitake Roast Chicken
1. Processing the dressed chicken. Soak the dressed chicken in water for half an hour to remove the blood water leached out. After washing clean, use a knife to prick from the body cavity outward, being careful not to pierce the skin (the purpose is to make the chicken marinate evenly). 2. Making the brine. Star anise 50 g, cinnamon 50 g, kaempferia galanga 15 g, tsaoko 35 g, fennel 45 g, amomum villosum 20 g, Sichuan peppercorn 20 g, clove 5 g, bay leaf 3 g, angelica dahurica 25 g, dried tangerine peel 15 g, cassia bark 40 g, cardamom 30 g, zi kou 30 g, shiitake mushroom 15 g, ginger 15 g, galangal 30
-
Processing Methods and Technical Key Points for Licorice Waxberry
Licorice waxberry is a type of preserved fruit product, and the raw material waxberry is utilized in the form of its finished salted blank. Its processing technology is as follows: 1. Raw material handling: The process of turning fresh waxberry into a semi-finished product is as follows. Cure with 20% salt, one layer of fruit and one layer of salt. Add another layer of salt on top. After curing for more than ten days, scoop the raw material out of the brine and sun-dry it until salt frost appears, which is the semi-finished salted blank. Further process from the salted blank. First, desalt by soaking in water to remove the overly salty taste; the degree of desalting generally leaves about 2% salt, and there is no need to remove the salt completely.
-
A Detailed Guide to Processing and Making Licorice Watermelon Seeds
Ingredients: 500 g watermelon seeds, 10 g peanut oil, 25 g refined salt, 3 g licorice, 50 g quicklime. Method: 1. Pour the quicklime into a large bowl, add 500 ml of clean water, stir well to make lime water, then add the watermelon seeds and soak for 4-5 hours, then remove them, rinse thoroughly with clean water, and remove the mucous membrane on the shells. 2. Put the refined salt and licorice into a pot, pour in 150 ml of clean water, place over high heat and boil for 10-15 minutes, filter out the licorice to make licorice salt brine
-
Processing Methods and Technical Key Points for Licorice and Sour Plum Ginger
This product is made by candying young ginger with licorice and sour plum juice. It has a sweet-and-sour ginger spicy flavor, stimulates the appetite and promotes saliva secretion, and refreshes the mind. The processing technology is as follows: 1. Raw material proportions: fresh young ginger slices 25 kg, granulated sugar 5 kg, licorice powder 10 kg, clove powder 20 g, sour plum juice 2 kg (or citric acid 150 g plus water 3 kg), sodium cyclamate 200 g, potassium sorbate 15 g. 2. Raw material handling: Select young ginger with thick, tender flesh, wash it, and scrape off the skin. Cut diagonally according to the transverse diameter into 0.
-
Processing Methods and Technical Key Points for Licorice Olive
The raw material used for licorice olive is also olive base, with the same processing technique as chili olive, only the formula is different, and of course the flavor is different too. The processing technique is as follows: 1. Raw material treatment: Desalt the olive base. Since the aim is to highlight the licorice flavor, too much salt should not be left during desalting; generally a slight saltiness is sufficient. After desalting, drain the water or bake until semi-dry for later use. 2. Licorice liquid preparation: Use 5% licorice liquid, that is, for 50 kg of olive base use 2.5 kg of licorice, add 50 kg of clean water, boil down into 20-25 kg of licorice liquid, filter and set aside.
-
How to process licorice kumquat? Detailed methods and steps
This product belongs to the preserved fruit category. The raw material used is salted kumquat base; fresh raw material is generally not used. The processing technique is as follows: 1. Desalting treatment: soak the salted base in water to remove salt, leaving about 2% salt in the base, that is, a slight salty taste is sufficient. 2. Semi-drying: sun-dry or bake. After draining off the water, it can be spread in a drying yard and sun-dried until semi-dry. If conditions permit, a drying room can be used for drying. It only needs to reach the semi-dry state, then set aside for use. 3. Preparing the liquid mixture: Preparation of licorice liquid: 50 kg of salted base requires 1.5-2.5 kg of licorice. If the licorice is of good quality, use 1.5 kg; if of poor quality, use 2.5 kg. Add 35-40 kg of clean water, heat and extract by boiling to draw out the licorice flavor, and continue heating and concentrating until about 12.5 kg remains, then filter to remove the residue. The licorice residue can be kept for continued use next time. Based on the raw material, weigh out 8% salt, 2-2.5% sodium cyclamate, and 1-1.5% food-grade citric acid, add them to the licorice liquid, dissolve them, and bring to a boil. Add the semi-dry raw material and stir so that it fully absorbs the liquid mixture. Generally, it should be left to stand for 8 hours.
-
How is drunken crab processed? A detailed preparation method for you
Take fresh crabs that have been washed and drained, lift the apron, poke a small hole with a bamboo skewer, stuff the inside of the apron with pepper salt, and close it back up. Prepare the curing liquid: fresh crabs 100 kg, white sugar 10 kg, refined salt 10 kg, ginger juice 6 kg, soy sauce 40 kg, Sichuan peppercorns 0.6 kg, yellow rice wine 20 kg. Mix the above ingredients thoroughly, then pour into a ceramic jar for curing, using enough to submerge the crabs. Place a bamboo mat and a weighting stone on top so that the crabs do not float above the curing liquid, and finally seal the mouth of the jar. After 3~4 days, a delicious drunken product is ready, and it can be taken from the jar and sold at any time.
-
Methods and Techniques for Processing Silver Carp and Bighead Carp into Fish Balls
Silver carp and bighead carp, two of the "Four Major Chinese Carps," have many intermuscular bones and a flavor slightly inferior to other fish, so they often sell poorly, making the problem of processing and utilizing silver carp and bighead carp urgent to solve. Below is an introduction to the method of using silver carp and bighead carp to process and make fish balls. Auxiliary ingredient formula: based on 50 kg of fish meat, 1 kg of salt, 3 kg of starch, 0.5 kg of granulated sugar, 0.075 kg of monosodium glutamate, an appropriate amount of ginger juice, and a water content generally 50% to 60% of the fish meat weight. Key operating points: select
-
A Detailed Explanation of Fish Cake Processing Methods and Recipes
Fish cake, also known as Kamaboko or board fish (called fish plate in Taiwan, China), is not commonly produced in China, but in Japan it sells in large quantities and comes in many varieties; it is a traditional surimi product of superior quality, among which steamed board fish cake is a product unique to Japan. Varieties of fish cake can be distinguished by the ingredients used in making them, the shaping method, the heating method, and even the place of origin, such as single-color fish cake, two-color fish cake, and three-color fish cake; square-shaped and leaf-shaped fish cakes; steamed board, roasted, and fried fish
条件筛选