-
Detailed Explanation of the Processing Method for Schisandra Fruit Leather
1. Process flow: raw materials ―→ sorting ―→ washing ―→ pulping and seed removal ―→ boiling ―→ homogenizing ―→ blending ―→ concentrating ―→ spreading into sheets and baking ―→ slicing ―→ drying ―→ packaging ―→ finished product. 2. Technical key points (1) Raw material handling: select fresh Schisandra (Schisandra chinensis) fruits with good ripeness, remove impurities and moldy portions, wash them clean, crush them with a crusher while removing the seeds, and homogenize with a homogenizer or colloid mill for later use. (2) Blending and concentrating: place the Schisandra pulp in a stainless steel
-
Schisandra Berry Jelly Processing Methods and Technical Key Points
1. Process flow: raw materials → sorting → washing → pulping and seed removal → boiling → filtering → blending → concentration → filling and sealing → sterilization → cooling → inspection → finished product. 2. Technical key points (1) Raw material handling: select fresh Schisandra berries with good maturity, remove impurities and moldy parts, then wash them clean, then crush them with a crusher while removing the seeds; after boiling, filter to remove the pulp portion. The pulp may also be retained, and after blending, homogenization treatment is required, with a homogenization pressure of 50 MPa. (2) Blending: the juice dosage is 25%-
-
What issues should be noted in the export processing of fresh-keeping shiitake mushrooms?
I. Raw material selection In the processing of fresh-keeping shiitake mushrooms, the first thing to note is the freshness of the raw materials, which is an important factor determining the quality of the finished fresh-keeping shiitake mushrooms. The raw materials must be fresh, and the color must be normal; secondly, the mushroom caps must be complete and round in shape, the stems must be intact, and the mushroom bodies must retain the graceful form of natural growth; the mushroom flesh must be thick, the edges of the caps must be neatly incurred, the partial veil unbroken or slightly open, and not fully opened; the cap diameter must be no less than 38 mm; and there must be no pests or diseases, off-odors, or soil impurities. II. Raw material handling and cold storage First,
-
Methods for Collecting, Processing, and Utilizing Snake Slough and Snake Skin
1. Collection and processing of snake slough. Snake slough can be collected in late spring and early summer, in autumn, or in winter, and is mostly found in damp areas or beside ditches. After collection, remove the mud and sand, dry it, and cut it into sections for storage. If 15 kg of yellow rice wine is used per 100 kg of snake slough and it is fried dry according to the wine-processing method, the result is wine-processed snake slough. 2. Stripping and utilization of snake skin. Snake skin is the outer skin stripped from the snake's body. The method for stripping snake skin is: tie a rope around the snake's neck and hang it up, use a knife to make a circular cut around the skin at the neck, and strip the snake skin from front to back into a long
-
What precautions should be taken when processing snake venom? A full breakdown of the key operational points
1. Pay attention to safety when extracting and processing snake venom. To strictly prevent venomous snakes from injuring people, the movements for releasing the snake during and after venom extraction must be quick. When returning a snake that has been milked to its cage, first place the snake's body inside, and when the snake's head approaches the edge of the container opening, let go quickly. If you cannot withdraw your hand in time when releasing the snake, you can easily be bitten by the snake striking back. 2. Venom extraction equipment must be strictly sterilized. 3. If the venomous snake clamps onto the vessel and will not let go, you may gently swing the snake's trunk; if it still will not release its bite, you may gently twist its neck, or use a small stick or your finger to stimulate the snake's cloaca. Never pull hard
-
Detailed Explanation of Key Points in Honey Storage and Processing Technology
1 Storage 1.1 Use appropriate containers. Honey is a weakly acidic liquid, and contact with metal will cause oxidation, so non-metal containers (except stainless steel drums) such as vats, wooden barrels, non-toxic plastic buckets, etc. must be used for storage, but they must be washed clean and wiped dry. In areas with high honey production, honey storage sites can be established. Storage containers must be clean and dry, honey should not be stored too full, and 25%-30% of space should be left during transportation to prevent honey from fermenting and overflowing or bursting the container due to heat and vibration. The room temperature for honey storage should be maintained at
-
Processing Methods and Technical Key Points for Salted Sour Carambola (Starfruit) Salt-Preserved Base
Carambola (starfruit) falls into two major types: one is crisp, sweet and refreshing, suitable for eating fresh or for processing into carambola juice, carambola in syrup canned goods, and the like. Whether eaten fresh or processed, its quality and flavor are quite good. The other type is extremely sour with an astringent taste, mostly grown in mountainous areas without any special cultivation by humans. Because of its strong sourness, this sour carambola is not suitable for fresh eating, but it can serve as a raw material for sugar-preserved processing. In order to preserve the raw material, it can first be made into a semi-finished salt-preserved base. There are two methods for making the salt-preserved base: one is the brine curing method, preparing a 5-8
-
Processing method and production steps for candied persimmon slices
1. Raw materials. Choose persimmons whose skin has turned yellow and that have been de-astringented as the raw material. 90 kg of persimmons, 30 kg of granulated sugar, 20 kg of salt. 2. Raw material handling. Wash, peel, cut in half, remove the calyx, and rinse clean with water. 3. Soaking. Soak the persimmon fruit in a 5%-6% salt water solution made with 5 kg of salt and water for 12 hours; the water must submerge the persimmon fruit. To prevent the persimmon fruit from oxidizing and turning black, soak while processing. 4. Salting. Take the remaining 15 kg of salt and the persimmon fruit and, in a layer of persimmon
-
Processing Methods and Technical Key Points for Pitted Candied Red Dates
(1) Process flow: Material selection → Pitting → Soaking and washing → Boiling → Date soaking → Drying → Packaging. (2) Technical key points 1. Material selection: Select fully ripe red dates with uniform size, bright red color, thick flesh and high sugar content as raw materials. Remove moldy and spotted dates. Green dates are not suitable as raw materials. 2. Pitting: Use a pitting machine to punch out the pits. The diameter of the pit outlet should not exceed 0.7 cm, the opening should be complete without damage, the punched holes should be straight at top and bottom, with no broken ends and consistent needle holes. The removed date pits, which carry some date flesh, can be used to process vinegar.
-
Processing method for cloudy peach juice beverage
(1) Process flow: raw material selection -> fruit washing -> blanching -> crushing -> pulping -> filtering -> blending -> deaeration -> homogenization -> sterilization -> filling -> sealing. (2) Technical key points: ① Raw material selection: select well-ripened fruit, remove diseased, insect-damaged and rotten fruit, and pick out underripe fruit for further ripening before use. ② Washing: wash off surface dirt with clean water, or use detergent to remove the fuzz from peach skin. When pesticide residues are high, rinse with a 1% hydrochloric acid solution, then wash clean with water. ③ Blanching: at 80-
条件筛选