-
Detailed Explanation of the Processing Technology for Ganoderma Health Tea
Developing Ganoderma health tea can enhance the competitiveness of tea. A brief introduction to the processing technology of Ganoderma health tea is given below. Its process flow: Ganoderma slicing, extraction, filtration, concentration, spray blending (tea leaves must first be re-fired), drying. 1. Ganoderma slicing: Considering overall benefits and the use of mid-to-low-grade tea, it is ideal to select mid-to-low-grade Ganoderma without deterioration as the raw material. After washing the Ganoderma clean with water, cut it into thin slices of about 5 mm, and set aside. 2. Extraction and filtration: Take the prepared thin Ganoderma slices, at a ratio of 100 grams of Ganoderma to 10
-
What are the processing technologies for reishi (Ganoderma lucidum) products?
Reishi milk powder I. Raw material formula: fresh milk 300kg, whey powder 25.2kg, refined vegetable oil 10kg, high-fructose corn syrup (70%) 15kg, reishi 8kg, vitamin A 1.2g, vitamin C 60g, vitamin E 1.2g, calcium lactate 5kg, ferrous lactate 62g, zinc gluconate 87g, lecithin 1.2kg. II. Process flow: whey powder, high-fructose corn syrup, vitamin C, etc. -> dissolve -> filter -> vegetable oil VA, VE
-
Detailed Explanation of the Key Processing Techniques for Reishi Mushroom Fine Powder
For the processing technology, direct grinding into powder or drying an extract into powder is generally used. For direct grinding into powder, the reishi fruiting bodies are first crushed into small pieces, then repeatedly ground with an electric grinder and sifted to obtain fine powder. For drying an extract into powder, the reishi fruiting bodies are first crushed into granular form, then soaked in warm water. After that, the extract liquid is dried into powder. This kind of fine powder contains no cellulose, has higher commercial value, and has better market prospects. This processing method is described in detail below. 1. Preparatory work: The raw material is dried reishi fruiting bodies selected to be free of soil and dust and free of mold; the equipment includes a grinder, a jacketed reaction tank
-
Detailed Explanation of the Processing Technology of Ganoderma and Astragalus Wine
I. Raw Material Formula: Astragalus 30k, Ganoderma 30kg, Codonopsis 15kg, Atractylodes macrocephala 45kg, Baijiu l00kg, white granulated sugar and flavoring appropriate amount. II. Process Flow: Purified water → add sugar → heat purification → add acid → cooling filtration; Raw materials → processing → soaking → filtration → blending → sterilization; Finished product → packaging → cooling → sterilization → filling → filtration → cooling. III. Key Operating Points: 1. Soaking: Slice Astragalus, Ganoderma, Codonopsis, and Atractylodes macrocephala, wrap in white fine cloth and tie the opening
-
Detailed Explanation of Key Technical Points for Ganoderma Harvesting and Processing
1. Harvesting and drying. Under normal conditions, it takes about 20 days from the appearance of the primordium to the maturation of the cap. When the cap is fully expanded, releasing a large number of spores, the white edge has disappeared, the thickening is not obvious, and the cap color is crimson red (red Ganoderma), with uniform color, it can be harvested. After harvesting, promptly cut off the culture medium adhering to the base of the stipe from the fruiting body, dry it in sunlight, or place it in a drying room for drying, with the temperature controlled at 55-65°C, until the moisture content of Ganoderma is about 12%. The moisture content of fresh Ganoderma is usually 63%, and the drying ratio is generally 40%-
-
Detailed Explanation of the Harvesting and Processing Methods and Uses of Lingzhi (Reishi Mushroom)
Harvesting and Processing: Lingzhi generally requires 50-60 days from inoculation to harvest. When the edge of the cap stops growing and brownish-red basidiospores appear on the hymenium beneath the cap, it indicates that the fruiting body has matured, and it can then be harvested. Cut it off from the middle of the stipe with a small knife, taking care not to crack the cut surface, then spread it out to air-dry or dry it at low temperature. If collecting spore powder, place clean plastic sheeting or smooth, clean paper under the fruiting bodies on the cultivation rack, collect with a bristle brush, and after the spore powder has been sun-dried and dried, store it in plastic bags for medicinal use. Uses:
-
A Detailed Explanation of the Processing Methods and Key Technical Points for Angelica sinensis
The pharmacological effects of Angelica sinensis (dong quai) are very broad, and it is an extremely commonly used traditional Chinese medicine. Therefore, it is often made into different decoction pieces for use. The common decoction pieces mainly include "whole dong quai," "dong quai body," "dong quai tail," "stir-fried dong quai," "dong quai charcoal," "oil-stir-fried dong quai," "wine-stir-fried dong quai," and so on. They are described separately below. (1) Whole dong quai: take the raw Angelica sinensis medicinal material, remove impurities, wash clean, pile and moisten until thoroughly penetrated, cut into thin slices, and dry in the shade or at low temperature. (2) Dong quai body: wash the dong quai body clean with water, moisten until
-
What are the processing methods for Angelica sinensis? Read this article to find out
After harvesting, shake off the soil, pick out the rotten roots, remove the remaining leaf stalks, and after the moisture has slightly evaporated, tie them into flat bundles weighing 0.5~1 kg and place them in a smoking shed. Inside the smoking shed, build a 130 cm high rack, lay bamboo strips on top, and place the angelica bundles on it alternately flat and upright, with a thickness of 30~50 cm. Use soybean stalks, wet poplar, willow wood, etc. as fuel; after lighting, spray water so that it only produces smoke and no open flame, smoke them to color, until the surface of the angelica turns reddish red, then switch to coal fire or firewood (grass) fire and smoke for about 10 days, then turn over
-
Origin Processing Methods and Technical Key Points for Angelica sinensis
The processing of Angelica sinensis directly affects the quality and medicinal efficacy. Because fresh Angelica sinensis contains more than 60% water and the medicinal component volatile oil, if processing is not timely or not done well, it will become moldy and deteriorate. Processing methods and procedures for Angelica sinensis: 1. Sorting and bundling. The recovered Angelica sinensis should be sorted promptly, and roots that are rotten, especially water-rotted, should be picked out to prevent the spread and infection of water rot. The selected Angelica sinensis is spread under the eaves in a dry, ventilated place to air-dry for about 7 days so that the moisture evaporates and the roots become soft, then they are bundled with willow twigs or tree bark. Each bundle of fresh
-
Key Harvesting and Processing Techniques for Angelica sinensis (Danggui) (Part One)
(1) Harvesting For direct-sown plants, dig in mid-to-late October of the second year; for seedlings raised in a nursery and then transplanted, dig in mid-to-late October of the same year, when the plants have withered and turned yellow. Digging too early results in roots that are not plump and solid, with low yield and poor quality; digging too late means the soil has already frozen, making digging difficult and prone to breaking the roots. Before harvesting, first cut off the above-ground stems and leaves and sun-dry them for 3-5 days, so that the roots become fuller and more solid; then carefully dig out the entire root. (2) Processing After harvesting, angelica sinensis must not be piled up. First clean off the soil, choose a high, dry, well-ventilated spot, spread the roots out to dry until the roots become soft, or sort them
条件筛选