-
A detailed explanation of the production processes of shacha sauce and silver shrimp paste
Shacha sauce: generally, dried shrimp and onion are first deep-fried, peanut kernels are roasted, then they are combined with garlic, white sugar, jinshi (a type of fermented black beans), soy sauce, sand ginger powder, raw oil and a small amount of preservative powder, etc.; after boiling, the mixture is ground fine to obtain the finished product. Silver shrimp paste: it is made from raw materials such as baijiu, shrimp roe, a small amount of shrimp paste and a small amount of preservative powder, which are ground into a paste and then sun-dried to obtain the finished product. Quality standards and eating methods: the color is light brown and fresh, with a distinctive aroma, sauce flavor and the umami of shrimp. Shacha sauce also has a garlicky spicy taste. Both are required not to become moldy or breed insects. They are mainly used as a condiment
-
Detailed explanation of large icefish processing technology, mastering the key operation points
Large icefish, also called noodle fish, was originally widely distributed in the main stream and affiliated lakes of the middle and lower reaches of the Yangtze River. Its flesh is tender and delicious, rich in nutrients, and eating it gives a special fresh cucumber-like aroma. Large icefish generally has a body length of about 20 cm, with no bones or spines, and is a small valuable fish with very high economic value, deeply welcomed in domestic and international markets. From 1985 to the early 1990s, the reservoir transplantation and propagation of large icefish was carried out comprehensively across our country and achieved success. Its distribution area is continuously expanding, and output is increasing day by day. How to do a good job in
-
Detailed Explanation of Fish Roe Processing Methods and Technical Key Points
Before making caviar, fish eggs can be processed into fish roe products. The process is basically the same as that for caviar, except that after the fish eggs are prepared, the roe is not removed but directly subjected to post-processing (post-processing is intended to produce different products such as salted and smoked products). Most fish roe products in the world are preserved by drying or salting. Generally, smoked products must undergo fermentation. That is, after the salted and sun-dried fish eggs are smoked, the separated roe is placed in a barrel, sealed, and stored in a cool environment (13-
-
What are the processing methods for salted garlic cloves
Processing garlic into salted garlic cloves requires simple equipment and offers significant economic benefits, and the product sells well on the international market. 1. Process flow: material selection → clove separation → soaking → peeling → rinsing → grading → blanching → cooling → rinsing → pickling → sorting → brine preparation → barreling → finished product. 2. Operating methods. 1. Seed selection. The garlic must be mature, dry, clean, with intact outer skin, free from insect damage and mold, and small heads and single-clove garlic should be removed. 2. Clove separation and soaking. Separate the cloves by hand, remove the garlic stalk and outer skin, keep the inner skin, and soak in clean water for 12 hours, changing the water at appropriate times.
-
Full detailed guide to the production process of Sichuan pepper oil
Production method 1. Cleaning and selection: The Sichuan pepper seeds are cleaned by screening, the Sichuan pepper stems and other impurities are removed, then they are roasted in a household rice cooker over heat until they taste fragrant and are not burnt. 2. Crushing: After roasting, the Sichuan pepper seeds are crushed with a stone roller or stone mortar until they become powder (the finer the particles, the better). 3. Boiling the oil: Place the roasted and crushed black powder into a pot of boiling water, then immediately stir it with an iron shovel or wooden stick (about 2.5 kg of water to 1 kg of cooked fine Sichuan pepper seed powder). At the same time, continue heating over low heat and keep it warm for about 1 hour, so that most of the
-
Detailed Explanation of the Processing Methods and Steps for Peeled Garlic
1. Seed selection. The garlic should be mature, dry, clean, with intact outer skin, free from insect damage and mildew, and overly small cloves and single-clove garlic should be removed. 2. Clove separation and soaking. Separate the cloves by hand, remove the garlic stalks and outer skin, keep the inner skin, soak in clean water for 12 hours, and change the water at appropriate times. 3. Peeling. Remove the garlic stem ends, inner skin, and the transparent garlic membrane attached to the garlic head, without damaging the garlic flesh. Then rinse clean. 4. Grading. According to clove size, grade one is 230-300 cloves per kg
-
Detailed Explanation of the Processing Technology and Key Operating Points for Candied Ginger Plums
This product is a traditional sugar-preserved food, formerly marketed in Southeast Asia, with a sweet, sour, salty, spicy and distinctive flavor. The processing technology is as follows: 1. Raw material processing: Prepare ginger powder: use fresh tender ginger and fresh mature ginger at a ratio of 4:3. Wash both types of ginger thoroughly, scrape off the ginger skin and outer peel, then chop and subject to color protection by soaking in a 0.1% sodium bisulfite solution for 8 hours. Then rinse with clean water, put into a pulping machine and beat into a fine pulp, spread in a drying tray, and dry in a dryer at 65-70 degrees Celsius to obtain dried ginger powder.
-
Processing method for cloudy peach juice beverage
(1) Process flow: raw material selection -> fruit washing -> blanching -> crushing -> pulping -> filtering -> blending -> deaeration -> homogenization -> sterilization -> filling -> sealing. (2) Technical key points: ① Raw material selection: select well-ripened fruit, remove diseased, insect-damaged and rotten fruit, and pick out underripe fruit for further ripening before use. ② Washing: wash off surface dirt with clean water, or use detergent to remove the fuzz from peach skin. When pesticide residues are high, rinse with a 1% hydrochloric acid solution, then wash clean with water. ③ Blanching: at 80-
-
Processing Methods and Technical Key Points for Pitted Candied Red Dates
(1) Process flow: Material selection → Pitting → Soaking and washing → Boiling → Date soaking → Drying → Packaging. (2) Technical key points 1. Material selection: Select fully ripe red dates with uniform size, bright red color, thick flesh and high sugar content as raw materials. Remove moldy and spotted dates. Green dates are not suitable as raw materials. 2. Pitting: Use a pitting machine to punch out the pits. The diameter of the pit outlet should not exceed 0.7 cm, the opening should be complete without damage, the punched holes should be straight at top and bottom, with no broken ends and consistent needle holes. The removed date pits, which carry some date flesh, can be used to process vinegar.
-
Processing method and production steps for candied persimmon slices
1. Raw materials. Choose persimmons whose skin has turned yellow and that have been de-astringented as the raw material. 90 kg of persimmons, 30 kg of granulated sugar, 20 kg of salt. 2. Raw material handling. Wash, peel, cut in half, remove the calyx, and rinse clean with water. 3. Soaking. Soak the persimmon fruit in a 5%-6% salt water solution made with 5 kg of salt and water for 12 hours; the water must submerge the persimmon fruit. To prevent the persimmon fruit from oxidizing and turning black, soak while processing. 4. Salting. Take the remaining 15 kg of salt and the persimmon fruit and, in a layer of persimmon
条件筛选