Bathroom Renovation Pitfall Guide: It's Not Too Late to Check These 10 Points Before Starting Work
Renovation is a headache-inducing task, and the bathroom at home is a place that is used frequently every day and is dark and damp all year round. There are simply too many things to pay attention to if you want to renovate it well, and there are many "pitfalls" to avoid. Huahua has summarized 10 tips for bathroom renovation, and I hope they can be of some help to you after reading them!
1. The drain inspection port must be tightened
The drain has always been a key part of bathroom renovation, because no matter what we do in the bathroom, we will use the drain. If the inspection port of the drain in our home is not tightened, then it is very likely that wastewater from the toilet upstairs will leak into your home, so just to be safe, it is best to tighten the drain inspection port a bit more.
2. The toilet must be installed properly
Many times, odors in our home bathroom are caused by the toilet and drain giving off smells. Therefore, this requires us to strictly follow the requirements when installing the toilet, so that the sewage outlet and the drain pipe can fit tightly together and no odors will appear.
3. Waterproofing construction must be done carefully
Waterproofing in the bathroom is especially important. Generally, when workers do waterproofing, they apply waterproof slurry, but it is best to apply it two or three more times, and you must wait until the previous coat is completely dry before applying the next one. Only in this way can you ensure that the waterproofing is done properly. If necessary, a water storage test can also be carried out.
4. Install a swing door if possible
Many families want to install a sliding door when renovating the bathroom, because it is simple and looks impressive. But after a long time, you will find that cleaning the dust from the sliding door track is really too difficult, so Huahua still recommends installing a swing door.
5. Choose flat tiles
Do not lay three-dimensional tiles just to pursue some sense of dimension. Three-dimensional means there will definitely be gaps, and gaps will require more energy and time for cleaning in the future, which really is not worth the loss.
6. Create a slope for drainage
Every time you take a shower in the bathroom, drainage becomes a problem. To prevent worries after moving in, you can make the drainage slope 3 percent, so the water will drain faster and you will not have to worry about standing water.
7. Remember to do tile grouting
After laying tiles, there will be gaps between each piece. If we directly fill them with white cement, they will turn black over time, which is very unattractive. If grouting is done, there is no need to worry about this phenomenon, because special waterproof and anti-oxidation glue is used, which can withstand the test of corrosion.
8. Choose an undermount sink
Compared with an undermount sink, a vessel sink has a certain aesthetic appeal, but it requires a lot of time for cleaning. If you are afraid of trouble, just install an undermount sink.
9. Do not install blinds in the bathroom
Although blinds are relatively protective and attractive, installing them in a dusty place like the bathroom is still not advisable, otherwise cleaning will be another big project.
10. Apply film to the shower enclosure
Some families install a shower enclosure for dry-wet separation. However, although the shower enclosure is made of tempered glass, for safety reasons, it is best to apply a layer of explosion-proof film.
Have you finished reading these 10 bathroom renovation suggestions? If you have other better suggestions, you are also welcome to interact and share them in the comments section!