What are the specific requirements of the net weight standard for feed packaging
Net weight standard for feed packaging
What is the net weight standard error for concentrated feed 40KG and 20KG? What range complies with national regulations? Thanks!
--------------------------------------
Our usual practice is: for 40KG, set the bagged weight at 40-40.1 kg; for 20KG, the bagged weight is 20-20.1 kg. We have not yet had any complaints about short weight. You can refer to this.
Su Ming added the following content on 2009-11-25 15:55
Our usual practice is: for 40KG, set the bagged weight at 40-40.1 kg; for 20KG, the bagged weight is 20-20.1 kg. We have not yet had any complaints about short weight. You can refer to this.
--------------------------------------
Check the Rules for the Metrological Inspection of Net Content of Prepackaged Goods: for 15000~5000g, the permitted shortfall is 1%.
--------------------------------------
There is no need to argue about this. It must be done according to the national metrological standard.
--------------------------------------
Feed net weight plus the weight of your packaging equals the weight when you pack it. That way you won't be afraid of an inspection by the Technical Supervision Bureau!!
--------------------------------------
Just mark both net weight and gross weight clearly and that's it.
--------------------------------------
They're just looking for trouble to collect money. Report them!
--------------------------------------
There should be a national standard, right?
--------------------------------------
Reply to 7#xr08
When the Technical Supervision Bureau conducts spot checks on weight, is it based on the manufacturer's warehouse or the distributor's location?
--------------------------------------
There is a national standard.
--------------------------------------
It exists in international metrological standards. It should be based on the warehouse. After a long time at the distributor's place, the weight will decrease.
Wang Xiaomeng added the following content on 2009-11-26 12:49
JJF 1070-2005 Rules for the Metrological Inspection of Net Content of Prepackaged Goods
You can search for this standard online.
--------------------------------------
Metrological standard for prepackaged products
--------------------------------------
Our usual practice is: for 40KG, set the bagged weight at 40-40.1 kg; for 20KG, the bagged weight is 20-20.1 kg. We have not yet had any complaints about short weight. You can refer to this.
Su Ming added the following content on 2009-11-25 15:55
Our usual practice is: for 40KG, set the bagged weight at 40-40.1 kg; for 20KG, the bagged weight is 20-20.1 kg. We have not yet had any complaints about short weight. You can refer to this.
--------------------------------------
Check the Rules for the Metrological Inspection of Net Content of Prepackaged Goods: for 15000~5000g, the permitted shortfall is 1%.
--------------------------------------
There is no need to argue about this. It must be done according to the national metrological standard.
--------------------------------------
Feed net weight plus the weight of your packaging equals the weight when you pack it. That way you won't be afraid of an inspection by the Technical Supervision Bureau!!
--------------------------------------
Just mark both net weight and gross weight clearly and that's it.
--------------------------------------
They're just looking for trouble to collect money. Report them!
--------------------------------------
There should be a national standard, right?
--------------------------------------
Reply to 7#xr08
When the Technical Supervision Bureau conducts spot checks on weight, is it based on the manufacturer's warehouse or the distributor's location?
--------------------------------------
There is a national standard.
--------------------------------------
It exists in international metrological standards. It should be based on the warehouse. After a long time at the distributor's place, the weight will decrease.
Wang Xiaomeng added the following content on 2009-11-26 12:49
JJF 1070-2005 Rules for the Metrological Inspection of Net Content of Prepackaged Goods
You can search for this standard online.
--------------------------------------
Metrological standard for prepackaged products