What problems are likely to occur when batching minor ingredients?
Problems with minor ingredient batching
Our company has installed a minor ingredient mixer with a capacity of 500 kg. I would like to ask, if I mix 300 kg in a single batch, is it suitable to use this thing?
--------------------------------------
Using this thing is suitable
--------------------------------------
There is nothing unsuitable about it, 200 is fine too, as long as the coefficient of variation you test is reasonable
--------------------------------------
Yes, it is best to test the mixing uniformity, as long as it is within range
。
--------------------------------------
It is suitable, you can use it
--------------------------------------
Test the mixing uniformity, as long as it is within range
--------------------------------------
To give play to the normal mixing performance of the mixer, a fill factor must be considered. Too little or too much relative to its rated capacity will both affect the mixing uniformity
At the same time, the following content was added on 2009-12-5 12:03
To give play to the normal mixing performance of the mixer, a fill factor must be considered. Too little or too much relative to its rated capacity will both affect the mixing uniformity.
--------------------------------------
Adjust according to your product, including the mixing time.
--------------------------------------
It needs to be determined by the type of mixer.
--------------------------------------
--------------------------------------
Yes, even if you exceed it a little, it is fine, as long as the material does not go above the paddles~~Testing the mixing uniformity more is the standard
--------------------------------------
Of course it is fine, this amount is quite suitable, and it can ensure that the minor ingredients are fully mixed.
--------------------------------------
Using this thing is suitable
--------------------------------------
There is nothing unsuitable about it, 200 is fine too, as long as the coefficient of variation you test is reasonable
--------------------------------------
Yes, it is best to test the mixing uniformity, as long as it is within range
。
--------------------------------------
It is suitable, you can use it
--------------------------------------
Test the mixing uniformity, as long as it is within range
--------------------------------------
To give play to the normal mixing performance of the mixer, a fill factor must be considered. Too little or too much relative to its rated capacity will both affect the mixing uniformity
At the same time, the following content was added on 2009-12-5 12:03
To give play to the normal mixing performance of the mixer, a fill factor must be considered. Too little or too much relative to its rated capacity will both affect the mixing uniformity.
--------------------------------------
Adjust according to your product, including the mixing time.
--------------------------------------
It needs to be determined by the type of mixer.
--------------------------------------
Test the mixing uniformity, as long as it is within rangeI support the above views
yooboo posted on 2009-12-5 11:44
--------------------------------------
Yes, even if you exceed it a little, it is fine, as long as the material does not go above the paddles~~Testing the mixing uniformity more is the standard
--------------------------------------
Of course it is fine, this amount is quite suitable, and it can ensure that the minor ingredients are fully mixed.