Cut a drink bottle once to grow flowers, and they unexpectedly grow like crazy without watering for a month
Sprite bottle flower pot, no need to water flowers for 1 month
The more flowers you grow at home, the more watering becomes physical labor. Watering all the flowers once each time is quite tiring. Is there any way to extend the watering interval? Just 1 Sprite bottle flower pot!
1. Find a large Sprite bottle
Rinse the remaining drink inside the Sprite bottle clean with water. Choose a large Sprite bottle and screw the cap on tightly.
2. Cut the Sprite bottle in half around the middle
Use a small knife to cut the Sprite bottle open, cutting from the middle of the bottle body, so it becomes an upper and a lower part.
3. Poke small holes in the bottle cap
Poke a few small holes in the bottle cap. You can use a needle. Then add some water and see whether water can leak out through the small holes. It is enough if it just barely leaks water.
4. Pour water into the lower half of the bottle
Pour clean water into the lower half of the bottle, about 6 parts full.
5. Insert the upper half upside down into the lower half
Insert the part with the bottle cap upside down into the water in the lower half, fill the upper half with soil, and plant the flower well. Water will slowly seep into the soil through the small holes, keeping the soil moist. It will not dry the flowers to death even without watering for about 1 month!
Cut a mineral water bottle once, and grow delicious yellow garlic sprouts
Do flower lovers like eating yellow garlic sprouts? Huahua loves eating yellow garlic sprouts. They are not only tender and delicious, but also especially nutritious. In fact, 1 mineral water bottle can grow pure natural yellow garlic sprouts. Super simple! Hurry and take a look!
1. Find a few plastic bottles
Mineral water bottles or drink bottles are both fine. Rinse the remaining drink inside the bottle clean with water. Growing yellow garlic sprouts does not need the bottle cap, so set the bottle cap aside.
2. Cut off the upper part of the plastic bottle, then insert it upside down into the bottle
Use a small knife to cut off the upper part of the plastic bottle, then insert it upside down into the bottle.
3. Pour in water and place 1 head of garlic
Pour clean water into the plastic bottle, then place 1 head of garlic on it so the bottom of the garlic touches the water surface.
4. Put it in a dark place
Put the plastic bottle in a dark place so the garlic can grow yellow garlic sprouts. Otherwise they will turn green.
5. Harvest the yellow garlic sprouts in about 20 days
Change the water once every 10 days. After about 20 days, you can cut the yellow garlic sprouts and eat them!
Cut a mineral water bottle once, and it instantly becomes a cutting tool
Spring is very suitable for cuttings. Flower lovers should act quickly. Cut a plastic bottle at home once, and it becomes a cutting tool! White roots will grow thick and fast!
1. Cut the plastic bottle once
Find a clean mineral water bottle and cut it once from the 1/3 position. Be careful not to cut it all the way through.
2. Insert the branch into foam
Poke 1 hole in a foam board and pass the cutting branch through the hole. This helps speed up rooting. The foam board should be smaller than the bottle diameter so it can easily be taken out of or put into the bottle.
3. Put the foam into the bottle
First pour clean water into the bottle, just 2-3 cm high at the bottom of the bottle, then put the foam board into the bottle so the bottom of the branch is inserted into the water.
4. Seal the cut with tape
Join the upper and lower parts of the plastic bottle together, then use tape to seal the cut.
5. After about 1 week, roots grow vigorously
Place the plastic bottle under scattered light. Usually after 7 days roots will sprout vigorously, white and thick!
Turn plastic bottles from waste into treasure,
saving money and full of creativity,
flower lovers should try it quickly!
If you think what Huahua said is useful,
then share it with others to take a look!