A Detailed Guide to Hydroponic Methods for the Happiness Tree, Latest Tutorial Shared

The Happiness Tree is a common ornamental plant, and everyone must be especially curious about whether the Happiness Tree can be grown hydroponically. In fact, theoretically all plants can be grown hydroponically, because the nutrients plants need are all nutrients dissolved in water. As long as you mix the Happiness Tree's nutrient solution well, that is enough. Now let us take a look at the hydroponic method for the Happiness Tree!

Hydroponic Methods for the Happiness Tree

1. Hydroponic cultivation: To grow the Happiness Tree hydroponically, you must first choose a healthy plant free of disease. Then remove the soil from the roots, wash them clean with clear water, and wash them several times, trying not to damage the roots. Before this, you can use drugs such as carbendazim to sterilize once, which makes root rot less likely. Pass its roots through the plastic seedling-holding grid attached to the hydroponic glass container. If it is too small, the grid can be cut larger. Fill the container with clear water to two-thirds of its volume, and immerse two-thirds of the roots in the water.

2. Change the water in time: For hydroponic cultivation of the Happiness Tree, you must pay attention to changing the water once a week until enough new roots have grown. Wash the container clean, replace it with a specially made nutrient solution, also filling it to two-thirds of its volume. The other operations are the same as above. Update the nutrient solution regularly.

Reasons Why the Happiness Tree Drops Leaves

1. Water reasons: One of the most common reasons in daily life is how much water is given. We know that the Happiness Tree is still a plant that rather likes water, but too much or too little can both cause the Happiness Tree to drop leaves. If you are rather lazy and always wait until a week has passed before remembering to water, at this time the soil is too dry and the roots are fragile. If you suddenly water too much, the roots will be damaged and leaf growth will be hindered, causing leaves to fall. But usually do not water too much either, to avoid root rot.

2. Light reasons: All plants need light to ensure growth. If you place the Happiness Tree in a dark place for a long time, it will cause it to be unhappy. Especially in winter, you should often take it out to get some sun. Of course, in the hot summer, it cannot always be exposed to the sun, to prevent the leaves from being scorched.

3. Temperature reasons: The Happiness Tree likes a warm and mildly hot environment. The suitable growth temperature is 20°C to 30°C. In the hot summer, everyone needs to pay attention to moisture retention, give appropriate shading, and increase humidity in the environment and by spraying water on the leaves. In the north, everyone should pay attention to temperature and place the Happiness Tree in a room with a suitable temperature.

4. Fertilizer reasons: For potted Radermachera sinica, in addition to requiring an appropriate amount of decomposed cake fertilizer and 3% multi-element compound fertilizer in the culture soil, topdressing should also be given continuously. During the growing season, a quick-acting liquid fertilizer can be applied once a month, usually decomposed cake fertilizer water. For a small number of potted plants at home, or for large potted plants displayed in public places for a long time, a small amount of multi-element slow-release compound fertilizer granules can be buried and applied regularly, or a mixed solution of 0.2% urea plus 0.1% potassium dihydrogen phosphate can be used for watering.

Cultivation Methods for the Happiness Tree

1. Temperature: The Happiness Tree likes a warm and humid environment. Temperature is the most important. The daytime temperature should be controlled between 19°C-21°C, and the nighttime temperature should be controlled between 18°C-20°C. This is the most suitable growth temperature. Too high or too low will affect its growth. In the hot midsummer, try to keep the temperature below 27°C. When the environmental temperature is very high, use appropriate shed shading. Increase environmental humidity, thereby increasing leaf surface humidity. In winter, the temperature cannot be lower than 8 degrees, and the humidity cannot be less than 5 degrees, otherwise below this temperature it will be frostbitten.

2. Humidity: The Happiness Tree rather likes moisture in both soil environment and indoor environment requirements. Indoor humidity should be controlled between 70-80%. In large banquet halls where humidity cannot be controlled, we spray the leaf surfaces once each in the morning and evening. If the humidity is too low or it is in a dry environment for a long time, the leaves will curl and turn yellow, affecting ornamental value.

3. Light: The Happiness Tree is a plant that likes sunlight and is also shade-tolerant. Light is very important. The Happiness Tree likes to grow in a semi-shady environment. In the north, under normal circumstances we all keep it indoors, so there is no problem of direct sunlight. Rather, it is afraid of being placed in a dark place for a long time, where neither direct light nor scattered light can reach. After a long time, it will certainly drop leaves. So in winter it should be placed on a balcony or in front of a window with sufficient sunlight to supplement light.

4. Watering: When summer comes, potted Happiness Trees should be watered once every 3 to 4 days, but this also depends on the individual situation. In winter, indoors in the north, the Happiness Tree almost stops growing, and watering should be controlled so that the potting soil is just not dry. If you water, water it thoroughly. If you do not water, then do not pour a single drop of water into the pot. This is the principle. Please everyone remember it.

5. Pruning: The purpose of cultivating the Happiness Tree is for ornament and to complement the indoor environment. If the tree shape does not look decent, then it is not beautiful, so it should be pruned carefully, generally pruned into a mushroom shape or a round mound shape. Cut off some old leaves and yellow leaves.

6. Soil: When the Happiness Tree is growing, soil is equally important. Choose a soil that is loose, breathable, has good drainage performance, and is also nutritious. Usually use garden soil: leaf mold: decomposed organic fertilizer: river sand = 5:3:1:1 ratio to prepare it. Persist in loosening the soil once a month during the growing season to ensure that its root area is always in a well-aerated state. If water accumulation is found in the pot, drain it as soon as possible, and after the potting soil dries out, repot and change the soil to maintain better growth of the Happiness Tree.

7. Fertilization: During the growing period, fertilize the Happiness Tree diligently to ensure vigorous growth of the Happiness Tree. Compound fertilizer or nitrogen-phosphorus-potassium 20:10:10 or farmyard manure, etc. In winter, fertilization can be stopped.

8. Pest and disease prevention: To deal with pests on the Happiness Tree, there are generally scale insects, mites, and aphids. Use Jiebidie, methidathion, manjing, pyridaben, zinc sulfur phosphorus, omethoate, and decamethrin for pest control. As long as you ventilate and exchange air frequently, generally there will be no pest infestation. The Happiness Tree's disease resistance is still very strong. If the pest damage is not severe, you can remove them by hand.