Which Harvester Brand Is Best? Popular Brand Recommendations

A harvester is a machine that harvests crops in one integrated process, completing reaping and threshing in one pass, gathering the grain into a storage bin, and then transporting the grain to a transport vehicle via a conveyor belt. When buying a harvester, we inevitably worry: which brand of harvester is better? Below we will give a brief introduction.

Introduction to Harvesters

The harvester was invented by Cyrus · McCormick. A harvester is a machine that harvests crops in one integrated process. It completes reaping and threshing in one pass, gathers the grain into a storage bin, and then transports the grain to a transport vehicle via a conveyor belt. Crops can also be harvested manually: the stalks of rice, wheat and other crops are laid out in the field, and then grain harvesting machinery is used for picking up and threshing. Crop harvesting machinery for harvesting the grain and straw of rice, wheat and other cereal crops includes harvesters, windrowers, binders, grain combine harvesters and grain threshers. Grain harvesting machinery was developed on the basis of various reaping and threshing tools.

Comprehensive Harvester Rankings

Kubota

Lovol Gshen

JohnDeere

Yanmar

Liulin

World

Chunyu

Guwang

MOSHINE

This data is provided by the cnpp Brand Research Institute and is for reference only!

Popular Harvester Brands

Guwang

Chunyu

Bilang

Lovol Gshen

Yanmar

Moshine

Dongfeng

Liulin

Boyuan

Jialian

Longzhou

Dafengwang

Harvester Maintenance Methods

Harvester maintenance includes maintenance of the whole machine and management of small details.

Debris at connecting parts should be cleaned thoroughly, and lubrication or oil-sealed protection should be done well; if there are areas prone to rust where the paint has peeled off and exposed the surface, paint should be applied promptly to prevent rust. For rubber belts, wipe them clean and dry them to prevent damage from insects and rodents; metal chains can be cleaned with kerosene or diesel, then boiled in engine oil for 15-40 minutes, or soaked overnight, taken out and air-dried until no oil drips, coated with softening oil, then wrapped in kraft paper and placed in a dry, ventilated place to prevent mildew and deformation.

There are also some rubber and plastic products on the harvester; they are highly prone to aging and deterioration after exposure to sunlight, and their elasticity becomes poor, affecting use the following year. When storing these products, it is best to coat their surfaces with paraffin oil, then place them in a ventilated, dry place away from direct sunlight. Plastic products and springs and other items may deform due to long-term pressure or improper storage, so the springs should be loosened, and conveyor belts and similar parts should be removed and stored separately.

In addition, some tools supplied with the machine, especially special-purpose tools and various spare parts, need to be stored separately and put back in their original place after use, so as to avoid loss caused by careless placement.

Editor's Comments

With the rapid development of our country's rural economy, the use of harvesters has greatly accelerated the progress of wheat harvesting and reduced the labor intensity of farmers. A single harvester plays an enormous role in the entire work process, so the editor suggests that it is best to purchase a model introduced by the local agricultural machinery promotion department and proven through local trial use and demonstration to have reliable quality and performance and to be suitable for local use. At the same time, pay attention to understanding the brand reputation of the model as well as the after-sales service capability of the manufacturer. Do not buy harvesters of inferior quality or with no guarantee of after-sales service. The editor has already introduced the popular harvester brands currently on the market, and you can refer to them.